vernier
- 1. Calipers, vernier calipers, measuring tools.
- 卡尺,游标卡尺,测量工具。
youdao
- 2. The test employs aging oven and vernier caliper.
- 本试验采用老化箱、游标卡尺。
youdao
- 3. Using vernier calipers, measure the slip ring diameter.
- 用卡尺,测量滑环的直径。
youdao
- 4. The depth vernier gauges can be used to measure depth and step.
- 深度游标卡尺用于测量深度,台阶等。
youdao
- 5. The simple Vernier scale is clearly marked for good visibility.
- 简单的游标尺的刻度清晰,具并且可见度很高。
youdao
- 6. The telescope is coupled with the vernier and rotate with it together.
- 游标和望远镜管一起绕中心轴旋转。
youdao
- 7. Vernier-type reluctance motors are widely used in industrial automation.
- 游标式磁阻电动机广泛应用于工业自动化领域。
youdao
- 8. Use vernier calliper to measure the length, diameter of nerve root on both sides.
- 借助游标卡尺测量两侧神经根的长度和直径。
youdao
- 9. Methods: Measuring 1400 permanent teeth with special dental vernier calliper in vitro.
- 方法:用牙科专用测量尺测量1400个离体恒牙牙颈曲度。
youdao
- 10. A vernier caliper and a personal computer were used for measurements and calculations.
- 测量使用游标卡尺,计算使用微型计算机。
youdao
- 11. In addition, this paper presents the vernier technology based on the phase measurement.
- 本文还介绍了基于相位测量技术的距离游标测距技术。
youdao
- 12. Because of the strict requirement, the length must be measured with a vernier calliper.
- 由于要求严格,这个长度必须用游标卡尺来量。
youdao
- 13. The paper solves the problem about how to apply range vernier technique to modern radar.
- 该文给出了游标测距在现代雷达中的一种应用方法。
youdao
- 14. Methods To measure the diameter by using vernier caliper and analyze them by statistics.
- 方法用游标卡尺测量血管内径,并进行统计学分析。
youdao
- 15. Various distances and angles were measured with piders , protractor and vernier caliper.
- 用游标卡尺、量角器和圆规分别测量各项数据。
youdao
- 16. The invention improves the moving phenomenon of deviation display vernier in the prior art.
- 本发明改善了公知技术偏差显示游标移动的现象。
youdao
- 17. It normally used vernier caliper, fitter disc, steel ruler, and other frequently used tools.
- 划线时,通常使用游标卡尺、钳工划线盘、钢直尺等常用工具。
youdao
- 18. The paper gives the result that the range vernier can be realized when the errors of these data are limited.
- 最后通过理论分析证明,当这些数据的测量误差满足一定条件时,即可实现游标测距。
youdao
- 19. In vernier mode, every 10 pixels of mouse movement will be interpreted as a single pixel of object movement.
- 在游标模式时,鼠标每移动10个像素,对象会移动1个像素。
youdao
- 20. Hands on with the all mechanical measuring instruments like Micrometer, dial bore gauge, Vernier, Height Gauge etc.
- 能熟练使用各种测量仪器,像千分尺,游标尺,高度游标卡尺等。
youdao
- 21. A new "phase shift type" vernier drive circuit which provides the analog power for step motors is presented in this paper.
- 本文提出了一种新型的“移相式”微步驱动电路,该电路向步进电动机提供一个模拟电源。
youdao
- 22. The major electronic components (vernier drives included) will be around $150. This includes the pre-wound litz wire coils.
- 主要电子零件(包括游标调谐盘)大概150美元,包括成品李兹线线圈。
youdao
- 23. Methods Using vernier caliper to measure the growth lengths of the fingernails, precisely calculated the daily growth rates.
- 方法运用游标卡尺测量指甲生长长度,计算每日生长速率。
youdao
- 24. Digital vernier caliper is composed of capacitance grid transducer, Liquid Crystal Display and corresponding testing circuit.
- 数字游标卡尺由容栅传感器、液晶显示器和相应的检测电路组成。
youdao
- 25. To test the damage degree of gastric mucosa by vernier caliper through the damage model of absolute ethyl alcohol to the SD rats.
- 采用急性无水乙醇损伤模型,以游标卡尺测定胃黏膜损伤的程度。
youdao
- 26. A method based on vernier caliper and digital image processing is introduced aiming at the calibration of micromanipulation system.
- 本文针对微操作系统的作业标定问题,提出了一种基于游标卡尺和数字图像处理技术的方法。
youdao
- 27. To measure the hole diameter, width and height of key by vernier caliper, if there is any discrepancy, PLS do not hesitate to contact us.
- 用游标卡尺,分别测量电机的轴径和起动器的孔径、键宽、键高等尺寸是否相同,如有差异,应及时同本公司联系,以求解决。
youdao
- 28. Satellite roll-yaw angles stable control using magnetically suspended momentum wheel(MBMW) with vernier gimballing capacity is investigated.
- 研究基于磁悬浮动量轮的微框架能力进行卫星的滚动-偏航姿态稳定控制问题。
youdao
- 29. The height, width and thickness of the compact substance of the buccal, lingual and inferior bony plates were measured with vernier calipers.
- 先用游标卡尺测定各截面的高度、宽度,以及颊侧、舌侧和下缘骨密质的厚度。
youdao
- 30. The height, width and thickness of the compact substance of the buccal, lingual and inferior bony plates were measured with vernier calipers.
- 先用游标卡尺测定各截面的高度、宽度,以及颊侧、舌侧和下缘骨密质的厚度。
youdao