pcb

1. With the circuit schematic design and the high-speed PCB design, completes stackup design and high-speed signal line design.
通过电路原理图设计和高速PCB 设计,完成了堆叠设计和高速信号线设计。

youdao

2. The PCB is attached via four clips.
PCB的连接通过四个片段。

youdao

3. It can also destroy PCB-based waste oils.
这种方法还可以消灭含有pcb的废油。

youdao

4. If you like to make your own PCB, try the one above.
如果你想使你自己的电路板,上面的一个尝试。

youdao

5. Provide direction to PCB designer on PCB layout design.
为印刷电路板设计员提供指导。

youdao

6. Ability to read PCB wiring and principium diagram as plus.
具备PC B接线图,和线路图的阅读能力者优先。

youdao

7. The PCB design has been prepared with the free PCB program.
PCB设计是通过自由软件PCB完成的。

youdao

8. Define PCB layout instruction for power electronic circuit.
功率电路的印制板设计方案。

youdao

9. It protects PCB from power surges from external power supply.
它从电源保护电路板由外部电源浪涌。

youdao

10. Most of this equipment was installed well before the PCB ban.
这台设备的安装之前,大部分是在PCB禁令。

youdao

11. There are two TVS diodes on this PCB for 5v and 12v protection.
有两台电视在这个电路板二极管为5V和12v的保护。

youdao

12. Specially designed for PCB surface clean requirement of SMT line.
根据PCB 特殊清洁需求开发设计的特殊设备。

youdao

13. There are a number of PCB dielectric materials on the market today.
在当今的市场上有相当数量的pcb绝缘材料。

youdao

14. Specially designed for strict PCB surface clean requirement of SMT line.
根据PC b高清洁需求开发设计的特殊设备。

youdao

15. Objective To observe PCB affect the ability of learning and memory in rats.
目的研究多氯联苯对大鼠学习记忆能力的影响。

youdao

16. A PCB is an internal structure that holds the control information for a connection.
PCB是为连接保存控制信息的一种内部结构。

youdao

17. A poor PCB design is one where components are connected randomly to ground points.
一个比较差的PC B设计就是器件随便地连接到接地点。

youdao

18. The hardware design includes the schematics, PCB layout design and hardware debugging.
硬件设计包括原理图、PCB版图设计和硬件安装调试。

youdao

19. Dredging will continue over the next few years, after which the river should be PCB-free.
疏浚将在接下来数年中持续,直至这条河中没有PC B物质。

youdao

20. This will lead to further reduction of cost and space on the PCB of the pressure-sensing module.
这将导致进一步降低成本和空间上的压力传感模块电路板。

youdao

21. Therefore, CMP is a strong tool for reserving a sufficient margin in the PCB manufacture process.
所以,CMP在PCB中预备一个足够的空间中,是一个有力的工具。

youdao

22. PCB concentrations must be determined in all oil-filled electrical equipment designated for disposal.
多氯联苯的浓度必须根据所有充油电气设备指定处置。

youdao

23. Looking ahead, we will provide PCB manufacturers to provide better products and more professional services.
放眼未来,我们将为PC B厂家提供更优质的产品和更专业的服务。

youdao

24. I didn't lay out the computer PCB, but I did lay out a PCB for a floppy disk controller that I had designed.
我没有列出的计算机电路板,但我并奠定了印刷电路板的软盘控制器,我已设计。

youdao

25. It is always a challenge to testing high density PCB for researchers in the high automatic manufacture field.
在高度自动化的生产现场如何检测高密度pcb一直是研究人员的难题。

youdao

26. Is mechanical dimension PCB specification (Fab drawing) available at inspection station under document control?
PC B机械尺寸规格是否按照文件要求在检验站进行管控?

youdao

27. The Company PCB enterprises under different capacity, the development of different types of processing equipment: B.
本公司根据不同pcb企业的产能,开发出不同型号的处理设备:b。

youdao

28. The PCB material code shall be added by the engineering department after the PCB documents are approved and sent out.
所有PCB的物料编码在PCB资料发出后,工程部即可增加该物料的编码。

youdao

29. After performing the shorts and opens test the in-circuit tester tests each component on a PCB assembly one at a time.
短路、开路测试完成以后,在线测试仪需要在同一时间对印刷电路板上的每一个器件进行测试。

youdao

30. After performing the shorts and opens test the in-circuit tester tests each component on a PCB assembly one at a time.
短路、开路测试完成以后,在线测试仪需要在同一时间对印刷电路板上的每一个器件进行测试。

youdao