ack

1. Ack! Same problem!: 同样的问题又发生了！

2. This ACK indicates that all messages have been received.: ACK表明所有的消息都已经收到了。

3. Ack: Indicates that the acknowledgment number field is significant.: ACK：表明确认号字段是有意义的。

4. In our dearth of ack-ack guns all sorts of contrivances were used.: 在缺少高射炮的时候，我们利用了各种各样的巧妙方法。

5. The server answers with a packet where both the SYN and ACK flags are set.: 服务器以设置了 SYN和ACK 标志的包应答。

6. Finally, the client confirms receipt with an ack packet (see Figure 4).: 最后，客户机使用一个ACK报文确认已接收到报文(请参见图4)。

7. The server will acknowledge this by returning a packet with the ack flag set.: 服务器将通过返回设置了ACK标志的包进行确认。

8. The Buy Ack action you just created meets this requirement for the Buy event.: 您刚才创建的BuyAck操作满足Buy事件的这个要求。

9. Press the button to post the comment. Press button Ack also post the comment.: 按钮发布备注，“确认”钮也会发布备注。

10. The tcp_input on the server side processes this ack packet and calls soisconnected .: 服务器端上的tcp _ input处理此ack包，并调用soisconnected 。

11. If the port is not open, the scanned host sends a packet with the RST and ack flags set.: 如果端口未打开，则被扫描主机发送设置了rst和ack标志的包。

12. Again, nothing too complicated. Now let's see what the destination's ACK looks like.: 看，没什么太复杂的。

13. The client selects the value of its SACK options whenever transmitting a delayed ACK.: 在传输延迟的应答时客户机选择SACK选项的值。

14. The ACK request needs to be configured just like the INVITE request created previously.: ACK请求需要像前面创建的INVITE请求那样配置好。

15. If we received the response from the second UAS, we need to send an ACK to the first UAS.: 如果我们接收了来自第二个UAS的响应，则需要将ACK发送到第一个UAS。

16. Send an immediate ACK to the customer confirming the request and supplying a confirmation number.: 向客户发送即时的ACK，确认请求并提供校验码。

17. The benefit of using UDP is that it is state less so there is no problem of managing ack info.: 使用UDP的好处是，它区块少所以没有应答信息管理的问题。

18. UA1 acknowledges the 200 OK response by sending an ack request to UA2, where the call was forwarded.: UA 1通过向ua2发送一次ack请求，来确认响应200OK。

19. In response, the scanned host returns a packet with the SYN and ack flags set if the port is open.: 如果该端口是打开的，则被扫描主机返回设置了syn和ack标志的包进行响应。

20. Guarantee levels: Tribes supports 3 levels of message delivery guarantee (NO_ACK, ACK, and SYNC_ACK).: 有保证的消息传递：保证级别：Tribes支持3个级别的消息传递保证(NO_ACK、ACK和SYNC_ACK)。

21. Finally, the client confirms this by sending a TCP packet back to the server with the ack flag set.: 最后，客户机通过向服务器发送设置了ACK标志的tcp包进行确认。

22. A SACK receiver, on the other hand, can issue an ack for 1 plus a SACK option for packets 3 through 9.: 另一方面，SACK接收方可以发出包1的ACK和包3到包9的SACK选项。

23. When the destination formulates its response, it includes an additional SOAP header (the ACK) in the message.: 当目的地阐明其响应时，它在消息中包含一个附加的SOAP消息头 (ACK)。

24. In normal operation, the remote client responds with an ack packet that moves the half-open connection to fully open.: 在正常操作中，远程客户机用一个ACK数据包进行响应，这会使半开的连接转换为全开的。

25. The server responds with an INIT-ACK, which includes the cookie (a unique context identifying this proposed connection).: 服务器使用一个INIT - ACK报文进行响应，其中就包括了cookie(标识这个连接的惟一上下文)。

26. Ack-Requested: This element lets the client determine whether an acknowledgement should be returned for a message sent.: Ack - Requested：这一元素允许客户端来决定对于发送的消息是否需要确认。

27. If the client successfully receives this acknowledgement, the client completes the handshake with an ack acknowledgement.: 如果客户机成功地收到这个确认，就通过发送ack确认完成握手。

28. As mentioned earlier, the sending side must agree to continually resend a message until it receives an ACK for that message.: 正如前面提及的那样，发送端必须同意持续重新发送消息直到它收到该消息的ACK。

29. You can specify which incoming TCP packets to scan and discard those that don't match the flags ack, FIN, PSH, RST, SYN, or URG.: 可以指定应该扫描哪些到达的TCP数据包，丢弃不与ack、FIN、P SH、RST、syn或urg标志匹配的数据包。

30. It sounds amusing, but not if you have a large green brain and go "Ack" a lot.Stay away or arm yourself with really top-level shielding.: 这似乎有些好笑，但如果你有个经常运转的绿色大脑袋，那最好离远些或者用些真正高水平的保护罩将自己武装起来。

热门分类

英语例句推荐