Dynamic Numerical Simulation for the Mechanism of V-shaped Notch Blasting
V形刻槽爆破机理动态数值模拟分析
Graver: V-shaped steel cutting tool used by engravers.Also called burin.
雕刻刀:雕刻铜版用的槽形钢刀。
The Indians cut notches on a stick to keep count of numbers.
印第安人在棒上刻v形凹痕用来计数。
notch wood with a knife
用刀在木头上刻v形凹痕
Experimental study of V-groove drag reduction effect in long-distance transportation pipeline
长输管道中V形沟槽减阻效果的试验研究
Effects of Technical Parameters on Etching Rate and Selectivity of Si Deep Trench Using ICP Etching
硅深槽ICP刻蚀中刻蚀条件对形貌的影响
And a giant mark- like the letter" V"- cut into its surface.
以及表面上刻画着的一个“V”字形的巨大标记。
Belt drives--Pulleys for classical and narrow V-belts drives(system based on datum width)--Geometrical inspection of grooves
GB/T11356.1-1997带传动普通及窄V带传动用带轮(基准宽度制)槽形检验
This then allows the lower plate lug to make contact of its two corners with the slanting walls of "V" groove.
这便于下面的极板年的两角与“V”字形沟槽的两个倾斜的壁相接触。
Belt drives--Pulleys for classical and narrow V-belts drives(system based effective width)--Geometrical inspection of grooves
GB/T11356.2-1997带传动普通及窄V带传动用带轮(有效宽度制)槽形检验
Local and Distortional Buckling Analysis of Cold-Formed Lipped-Channel with V-Stiffened Web under Axial Compression Force;
腹板V形加劲的冷弯卷边槽钢轴压下局部和畸变屈曲分析
Estimation of Crack Expansion Life of Bar V-shaped Notch Tip under Variable Amplitude Load
变幅载荷下棒料V形槽尖端裂纹扩展寿命的估算
Profile Control and Detection of Holographically Recorded Photoresist Grating Masks;
光刻胶全息光栅掩模槽形的控制和检测
double vee
双v形的, X形的
v groove mos device
v 槽型栅金属氧化物半导体掐
v groove mos transistor
v 槽型栅金属氧化物半导体晶体管
v groove isolation polycrystal backfil
v 型隔离槽的多晶硅填充
Design Method of Light Guide Plate with V-Cut Slot Microstructure
导光板中一种V-Cut槽结构的设计方法