Based on the comparison method, the fast temperature calibration experiment with single contact point of thermocouple on LF5-constantan and 6063T6-constantan were carried out, then the perfect temperature calibration curves of this two kinds of aluminous alloys were obtained.
采用比较法对铝合金LF5—康铜和铝合金6063T6—康铜进行了热电偶单接点快速温度标定实验,获得了这两种铝合金材料的理想温度标定曲线。
Several techniques, such as the compensation for the nonuniformity of the responsivity with a multiplier, the elimination of the nonuniformity of the background current with a digital type alteration processor, the improvement of the S/N ratio with multiple field averaging technique, to overcome the difficulties met in the temperature calibration of infrared TV systems are discussed.
讨论了几种用于克服斩波调制模式红外电视温度标定困难的技术，包括用乘法器补偿响应率的非均匀性；用数字式像差处理器消除本底电流的非均匀性；用多场平均技术提高信噪比等。
The temperature calibration has an important impact on the temperature accuracy, which is one of the two key performance parameters of distributed fiber optic temperature sensing systems.
分布式光纤拉曼测温系统的重要参量之一是其温度测量精度 ,系统的温度标定对温度测量精度有着极其重要的影响。
Under complicated and hard environment in blast furnace,a dynamic temperature calibration algorithm based on cross-beam temperature measurement is expounded,which connects the values of thermocouples with their corresponding areas of infrared image by gray scale statistical distribut.
通过高炉红外图像建立料面温度场是判断高炉煤气流分布形态的一种有效方法,温度定标是建立温度场的基本问题之一。
A quick and accurate and broad rang measurement of the environment and object temperature was realized.
采用台湾凌阳公司的红外测温模块解决了传统测温中需接触的问题,并且具备回应速度快、测量精度高、测量范围广,以及可同时测量环境温度和目标温度的特点,配合MCS51单片机成为一个测量距离达30米的非接触式的温度测量计。
The Design and Research of Temperature Regulator Based on Embedded System
基于嵌入式系统温度标定仪的研究与设计
Equations of Propagation of Uncertinty on ITS-90 and on Radiation Interpolation Scales;
90国际温标和辐射内插温标不确定度传播方程
A specific degree of hotness or coldness as indicated on or referred to a standard scale.
标准温度：用一个标准尺度指示冷热的特定程度。
Temperature Correction in the Temperature Field Reconstruction with Emission Spectrum Tomography
发射光谱层析重建温度场中的温度定标
Study and application of curve fit in thermometer calibrating
温度计标定中曲线拟合的应用及研究
Design of multi-temperature sensor calibration and analysis system based on STC89C52
基于STC89C52的多路温度传感器标定系统
Cross-platform Calibration of Passive Microwave Brightness Temperature
SMMR与SSM/I被动微波亮度温度数据交叉定标
Petroleum measurement systems-Calibration-Temperature corrections for use with volumetric reference measuring systems
GB/T17290-1998石油测量系统检定标准量器的温度修正
Calibration of Thermocouples Based on Virtual Instrument;
基于虚拟仪器的热电偶温度传感器的标定
Setting of Object Surface Temperature of Casting Slab Based on Support Vector Regression
基于支持向量机回归的铸坯表面目标温度设定
The workshop calibration of three-parameter combination logging tool
张力温度泥浆电阻率组合测井仪的室内标定
Sapphire Fiber-temperature Sensor Calibration System Design Scheme
蓝宝石光纤温度传感器标定系统设计方案研究
Multimode Fiber Based Temperature Sensor with the Capability of Wavelength Encoding
具有波长标定功能的多模光纤温度传感器
Calibration Technology on the Strength Measurement of the Cement Based on Ultrasonic Under Temperature Influence
温度影响下水泥塞超声波测强技术的标定
normal temperature and pressure
标准温度和压力标准温度及气压
Analysis of Automatic Weather Observation System Temperature Pressure Standard Measurement Uncertainty
浅析自动气象观测系统温度、气压标准测量不确定度的评定
Standard testing conditions: Officially specified conditions under which paper is tested: 50%relative humidity and 23 degree Celsius.
标准测试环境:正式指定的测试纸张环境；相对湿度50%，温度摄氏23度。
It is capable of displaying temperature flexuous curve, calibrating thermocouple, establishing the cutting temperature exponential formulation and predicating the state of cutting.
该仪器具有显示温度波形曲线、热电偶标定、确定切削温度指数公式、判定切削状态的能力。