Three types of thermal sensitive polyurethane TSPU(a)、TSPU(b)and TSPU(c),were synthesized and their phase transition temperature of the soft segment(defined as switch temperature,Ts) were measured.
合成了三种温敏聚氨酯TSPU(a)、TSPU(b)和TSPU(c),并对其软段相的转变温度(即开关温度)进行了表征,同时研究了不同种类聚氨酯的相容性对共混体系开关温度阀值的影响。
The rolling results and performance analysis showed that the initial rolling temperature should be controlled from 1 100 ℃ to 1 180 ℃, If the temperature is higher than 1180 ℃, the rolled piece will be difficult to be bitted;if the temperature is below 1 100 ℃, the steel tend to thermal crisp and the head of rolled piece is easy to crack.
轧制结果及性能分析表明,开轧温度控制在1100～1180℃范围内较好,高于此温度范围轧制时会出现轧件打滑,咬入困难现象,温度低于此范围,钢容易发生热脆,轧件头部易开裂。
The ～1 300 ℃ cogging temperature and >20% deformation rate is good for Mo plate rolling.
而1300℃左右的开坯温度和20%以上的加工率将有利于钼板轧制生产的进行。
The Switch Temperature of Thermal Sensitive Polyurethane and Its Maniplulation
温敏聚氨酯膜开关温度阀值及其调控途径
restoring temperature
复原温度 -恒温开关的
operating temperature of thermostatic switch
恒温开关的动作温度
offset temperature of thermostatic switch
恒温开关的偏移温度
operating temperature
动作温度 -恒温开关的
restoring temperature of thermostatic switch
恒温开关的复原温度
Note:the change-over difference means the difference between the temperature when the switch breaks and the one when the switch resets to close.
注：切换差是指开关断开时温度和开关恢复到闭合时的温度差。
High-voltage Switch Cabinet Temperature Fault Warning Based on Fiber-optic Temperature Measurement
基于光纤测温的高压开关柜温度故障预警
This is the light switch and that is the temperature adjuster, sir.
题：先生，这是电灯开关，那是温度调节器。
HERE IS THE LIGHT SWITCH, THE TEMPERATURE ADJUSTER, THE WARDROBE AND THE MINI― BAR.
这是开关,温度调节器,衣柜和食品箱.
Here is the light switch, the temperature adjuster and the wardrobe.
这儿是电灯开关、温度调节器和衣柜。
Here is the light switch, the temperature adjuster, the wardrobe and the mini-bar.
这是开关、温度调节器、衣柜和食品柜。
The Research on the High Voltage Switch Cabinet On-line Temperature Monitoring System;
高压开关柜在线温度监测系统的研究
"Before any work is done on the heater, disconnect all power to the heater by opening the switch at the main electrical circuit breaker of fuse box."
在调节温度控制器的温度设置之前,请首先关闭电源开关,切断电源。
The projector temperature is above the critical limit. Please allow The projector to cool down by turning off the projector
投影机温度高开限值， 应关机让投影机冷却
The Real-time Temperature Monitoring System Design of Electric Power Switch Contacts Based on MapX;
基于MapX的电力开关触头温度实时监测系统设计
The Study of Online Monitoring Observation System on Contact Point of the High Voltage Switch Cabine in Transforming Plant;
变电站高压开关柜接点温度在线监测系统研究
The Design of Wireless Temperature Monitoring System of the Switch Box Contacts of Generating Station;
发电厂开关柜触头温度无线式监测系统设计