Investigation on microstructure at the bonding interface of TiC cermet/steel composite plate prepared by explosive welding;
TiC硬质合金/碳钢爆炸焊接复合板界面微观组织
Numerical analysis of explosive welding interface layer based on δ function;
基于δ函数的爆炸焊接界面应力场数值分析
This paper presents an experimental study on the inward explosion welding of the clad tube onto the base tube.
本文对基管与复管的外包爆炸焊接进行了实验研究,观察了爆炸焊接界面的组织和波形,分析了用水作为铜管爆炸焊接的柔性芯模在减小基管爆炸缩径上的作用。
By adjusting explosion speed and density, interior explosion welding of the Al /stainless steel thin walled clad tube was researched (L/D≈60).
通过调整爆炸物的爆速、松装密度等参数,采用内爆炸法对铝/不锈钢细长双金属复合管(L/D≈60)的爆炸焊接进行初步的研究。
Under normal conditions,after explosion welding,no welding can be found in the area of the detonator,but serious damages and deformations can be found in its surrounding areas,which affects adversely the quality of the material.
在爆炸焊接工艺中,存在一种称为边界效应的物理现象。
Through an analysis of suspicious image in the X ray film, combine the forming process of the explosive welding stainless complex steel plate, utilize the method of metallographic examine , harmless measure , analysed by strength etc.
通过对X射线底片中可疑影像的分析,结合爆炸焊不锈复合钢板的成型过程,利用金相检验、无损检测、受力分析等方法,确定这一影像为爆炸焊不锈复合钢板结合面产生的裂纹。
After the explosive welding, specimens were annealed in vacuum at elevated temperature of 1 300 ℃, and the inter-diffused layers were formed in interface of Nb-1Zr and 316L stainless steel.
研究了Nb1Zr合金与316L不锈钢爆炸焊在1300℃退火后形成的互扩散层。
The standard of JB4733-1996 Explosive Welding Stainless Complex Steel Plate for Pressure Vessel, rules that explosive welding stainless complex steel plate must be heat treated before delivery only.
JB4 733— 1996《压力容器用爆炸焊不锈钢复合钢板》标准只规定了爆炸焊不锈钢复合钢板须经热处理后交货 ,通过力学性能、金相试验分析 ,证明了爆炸焊不锈钢复合钢板正火后的各项性能均优于退火状态 ,因此 ,爆炸焊不锈钢复合钢板应经正火热处
Experimental Study on Low Detonation Velocity Expanding ANFO Explosive Used in Metal Explosive Welding
金属爆炸焊接用低爆速膨化铵油炸药实验研究
Nanocrystalline structure at explosive weld interface of 321 and Qd370qD steels
321钢/Qd370qD钢爆炸焊接界面纳米晶组织
Microstructure of cementite beside interface in 321/Qd370qD explosive welding
321/Qd370qD爆炸焊接界面渗碳体的微观结构
SAFETY ASSESSMENT AND SAFETY MANAGEMENT OF EXPLOSIVE WELDING PROCESS
爆炸焊接过程的安全评价与安全管理
Microstructural Features Beside Interface in 321/Qd370qD Explosive Welded Plate
321/Qd370qD爆炸焊接界面渗碳体特征
EFFECT OF MATERIAL STRENGTH ON FORMING PROCESS OF EXPLOSIVE WELDING INTERFACE WAVE
材料强度在爆炸焊接界面波形成过程中的作用
Experimental Study on the Exploding Welding of Ni-Ti Shape Memory Alloy;
镍钛形状记忆合金爆炸焊接技术的试验研究
The Study of the Process and the Rupture on the Explosion Welding-Rolling Ti-steel Composites Plate;
爆炸焊接—轧制钛钢复合板——工艺和断口形貌研究
Analysis of Effect Factors and Parameter Optimization on Explosive Cladding Quality;
爆炸焊接质量的影响因素及参数优化分析
DISCUSSION OF APPLICABILITY OF EXPLOSIVE WELDING TECHNOLOGY TO EQUIPMENT RUSH-REPAIRING
爆炸焊接技术在装备抢修中的应用性分析
Simulation of effects of stand-off distance on explosive welding of three-layer tubes
间隙对三层圆管爆炸焊接影响的数值模拟
Experiment and Analysis on Jointing of Tool Steel and Carbon Steel by Explosive Welding
工具钢-普碳钢复合板爆炸焊接试验与分析
Numerical Simulation and Analysis for Explosive Welding of Large Area Ti/Steel Composite Board;
大面积钛/钢复合板爆炸焊接过程的有限元模拟与分析
Effect of Explosive Welding Parameter on Composite Plates Interface Structure and Mechanical Properties;
爆炸焊接参数对复合板界面组织及力学性能的影响
Researches of Impact Dynamics Problems and Prepared Bulk Metallic Glass Composite by Explosive Welding
块体非晶复合材料爆炸焊接冲击动力学问题研究及其实验制备
Explosive Mass-Bonding Property in Aluminum Alloy-Steel Explosive Welding
铝合金-钢爆炸焊接装药量与界面性能的关系(英文)
Analysis & Experimental Research of Defects in Interface Caused by Gap Pillars in Explosive Welding
爆炸焊接间隙与复合界面缺陷形成机理的试验研究
Calculation of the Angle Deformation in Explosive Welding Based on the Ideal Fluid Model of Symmetrical Colliding
基于理想流体对称碰撞模型的爆炸焊接流场角变形计算