This article describes characteristics of transient liquid phase diffusion welding, its external investigations and applicatiom in recent years.
重点介绍液相过渡扩散焊的特点及国外近年的研究和应用情况。
To reduce the numbers of thermal cycles in traditional transformation superplastic diffusion bonding(TSDB),a new welding process of transformation/diffusion brazing (T/DB) was proposed.
为减小相变超塑性扩散连接的循环次数,提出了一种新型焊接工艺"相变-液相扩散焊(T/DB)",即在待焊母材间预先放入液相扩散焊用的中间层,然后按传统相变超塑性扩散连接工艺施焊,但要求温度循环的峰值温度须同时大于母材的相变点与中间层的熔点。
The diffusion behavior of Nibased-Si-B amorphous foil for transient liquid phase bonding of 16Mn low-alloy steel was studied in order to develop new welding technique by the methods of the welding thermal simulation technique and microstructure analysis.
为了开发新型管道焊接技术,采用热模拟方法和显微组织分析技术,研究了一种Ni基Si、B非晶箔带在16Mn钢瞬时液相扩散焊(TLP)时的扩散行为。
Research of Transient Liquid Phase Joining Machine for Oil-pipeline Welding;
管道的瞬时液相扩散焊（TLP）焊机研究
Transient Liquid-phase Bonding with Two-step Heating Process of TP304H/12Cr2MoWVTiB Dissimilar Steel Pipe
TP304H/12Cr2MoWVTiB异种钢管的双温瞬时液相扩散焊工艺
Contrast analysis of 10Cr9Mo1VNb steel pipe transient liquid-phase bonding and TIG+SMAW
10Cr9Mo1VNb钢管的瞬时液相扩散连接与TIG+SMAW焊对比分析
Study on the microstructure of transint liquid phase diffusion bonding joint of 16Mn steel
16Mn钢的瞬间液相扩散焊接头微观组织
Applications of transient liquid-phase bonding in nickel and nickel-base alloy welding
瞬时液相扩散连接在镍及镍基合金焊接中的应用
Interface behavior of TLP between chromium-copper alloy and stainless steel
铬青铜与不锈钢瞬间液相扩散焊接界面行为
Investigation of Transient Liquid Phase Bonding for 12Cr1MoV/TP304H Heterogeneity Steel Pipes;
12Cr1MoV/TP304H异种管材的瞬时液相扩散连接
Effect of Holding Time on TLP Bonding of 20 Steel Pipes
保温时间对20钢管道瞬时液相扩散连接的影响
Transient Liquid Diffusion Bonding Process of Pearlite Heat-resistant Steel 12Cr1MoV
珠光体耐热钢12Cr1MoV的瞬时液相扩散连接工艺
Reserch on Nonplanar Interfaces Formed by Transient Liquid Phase Diffusion Bonding Process
瞬时液相扩散连接非平面结合界面的研究现状
Effects of Intelayer Composition on Transient Liquid Phase Bonding Process
中间层成分对瞬时液相扩散连接过程的影响
Joint Interface and Strengthen of Transient Liquid Phase Bonding for Heat-Resistance Steel;
耐热钢瞬时液相扩散连接界面结构与强化机制研究
The Key Parameters of the Transient Liquid Phase Diffusion Bonding Process and Selection Principle
瞬时液相扩散连接过程中的关键参数及其选用原则
Influence of Bonding Temperature on Microstructure and Property of T91/102 TLP Joint
连接温度对T91/102异种钢管瞬时液相扩散连接接头组织性能的影响
Novel Process of Active-Transient Liquid Phase(A-TLP) Bonding for Aluminum Matrix Composite
铝基复合材料的活性液相扩散焊新工艺
Microstructure and mechanical property of transient liquid phase bonded aluminum silicon alloy joint
Al-Si合金瞬间液相扩散连接接头组织与力学性能
Testing techniques of brazing and diffusion welding quality of liquid rocket engine
液体火箭发动机钎焊、扩散焊质量检测技术研究
On the other hand, the interrelations among the viscidity of cement slurry, diffusion time, grouting pressure, diameter of grouting pipe and slurry diffusion radius are analyzed.
分析了水泥浆液粘度、扩散时间、浆压力、浆管直径与浆液扩散半径之间的相互关系。