Influence of graphite flake on the strength and water absorption of epoxy coating;
鳞片石墨对环氧涂层强度和吸水性能的影响
Application of silane soakage and epoxy coating in Huanghai Bridge
硅烷浸渍和环氧涂层工艺在黄海大桥中的应用
To improve the bonding strength between the titanium alloy substrate and epoxy coating filled with the absorbent Fe,TiO2 films with a certain thickness are prepared on the titanium substrate by constant current micro-arc oxidation.
为了提高钛合金基体与Fe(吸波剂)/环氧涂层的结合强度,采用微弧氧化在钛合金表面制备一定厚度的二氧化钛多孔膜,之后浸涂Fe/环氧树脂涂料。
Electrochemical impedance spectroscopy of multi-layer epoxy coatings in NaCl solution;
多道环氧涂层在NaCl溶液中的电化学阻抗谱
The influence of size of mica fillers(124 μm, 38 μm and 19 μm) on diffusion of water in epoxy coatings was studied by use of electrochemical impedance spectroscopy and weightings methods.
以3种不同尺寸(124μm、38μm和19μm)的片状云母粉为填料,应用质量法和电化学阻抗法(EIS)研究云母填料尺寸效应对水在环氧涂层中的扩散行为的影响。
The diffusing behavior of water through epoxy coatings with different pigment volume concentration(PVC) has been studied by electrochemical impedance spectroscopy(EIS).
利用电化学阻抗谱技术 ,研究了H2 O在不同颜料体积浓度 (PVC)环氧涂层中的传输行为 ,计算出H2 O在不同PVC环氧涂层中的扩散系数 ,并分析了PVC对H2 O在环氧涂层中传输行为的影响 。
In this paper ,the effect of the strength of the epoxy bonding coating by adding the coupling agent KH-550 is studied.
在环氧胶粘涂层中加入偶联剂,研究其对胶接强度的影响。
The erosion resistance of SEBF-2 fusion bonded epoxy powder coating in emery sand slurry has been investigated by using rotating disk rig.
用旋转圆盘式冲刷腐蚀试验机研究了流速、含砂量、砂粒粒径等环境参数对ＳＥＢＦ－２型熔融结合环氧粉末涂层冲蚀特性的影响，并观察了涂层形貌实验结果表明：涂层的冲蚀率（Ｅ）与流速（Ｖ）、含砂量（Ｃ）、砂粒粒径（Ｄ）之间服从幂指数关系： Ｅ∝Ｖｎ１Ｃｎ２Ｄｎ３，ｎ１、ｎ２、ｎ３ 的相对大小表明，流速为主要影响因素，其次为砂粒粒径，而含砂量的影响相对较小；在本文的实验条件下，临界流速约为 ６ｍ／ｓ，涂层的第一临界粒径约为 ８０μｍ；第一临界粒径约为 ４１０μｍ。
The erosion resistance of SEBF-2 fusion-bonded epoxy powder coatings with different curing degrees has been studied in 1wt%NaCl + 1wt% emery sand slurry by using rotating disk rig.
利用旋转圆盘式冲刷腐蚀试验装置，研究了不同固化度的ＳＥＢＦ－２型熔融结合环氧粉末涂层在１％ＮａＣ１＋１％金刚砂砂浆中的冲蚀特性，并观察了涂层表面形貌。
There are a certain number of coating material,of which polyethylene coating and epoxy powder coating are frequently adopted.
食品、医药、饮水、石油化工等诸多行业使用的管道不允许因管壁腐蚀而使被送物受到污染,基于对管壁保护的需要,出现了涂塑钢管,其制造工艺主要包括管子去内毛刺、喷砂处理、预热、涂敷、固化、检验等工艺,采用的涂层品种主要有聚乙烯涂层和环氧粉末涂层等。
Influences of Polyurea and Epoxy Coating on the Frost Resistance of Concrete
聚脲涂层和环氧涂层对混凝土抗冻性的影响
Study of Anti-Corrosion Performance of Nano-SiO_2 Modified Epoxy Coatings
纳米SiO_2改性环氧涂层防腐性能的研究
ANTI-CORROSION PROPERTIES OF EPOXY COATINGS MODIFIED BY NANO-SiO_2
纳米SiO_2改性环氧涂层的防腐性能
Effect of Polyaniline on Anticorrosive Performance of Epoxy Coatings
聚苯胺对环氧涂层防腐蚀性能的影响
Study on the Inhibition Mechanism of Organic Corrosion Inhibitor in Epoxy Coatings;
有机缓蚀剂在环氧涂层中的作用机理研究
ROLES OF ZINC PHOSPHATE ON THE CORROSION OF THE SCRATCHED EPOXY COATING
磷酸锌对环氧涂层破损处金属的缓蚀作用
Electrostatic Conductive Performance of Epoxy Coating Doped with Polyaniline Filler
掺杂聚苯胺填料改善环氧涂层的抗静电性能
Evaluating the Diffusion Coefficient of Different Epoxy Resins with EIS
利用电化学技术测试不同环氧涂层的扩散系数
Thermal Cyclic Oxidation Behavior of NiAI Coating Prepared by Electric Thermal Explosion Spray
电热爆炸喷涂NiAl涂层的热循环氧化行为
Study on erosion resistant nano epoxy adhesive coating
环氧胶粘纳米涂层冲蚀磨损性能研究
Study on the epocy powder coating technology for X80 steel pipe
X80钢管防腐环氧粉末涂层技术的研究
Influence of Different Epoxy/Epoxy Curing Agent on Stratification Results of Self-Stratification Coatings
环氧树脂/固化剂对自分层涂料分层效果的影响
Coating： Gloss epoxy powder resistant to most chemicals, UV fading and heat.
涂层：高亮度环氧树脂涂层，耐腐蚀、热，防紫外线辐射。
（Coating：Gloss epoxy powder resistant to most chemicals ,UV fading and heat.
涂层：高亮度环氧树脂涂层，耐腐蚀、耐热，防紫外线辐射。
oxygen-acetylene flame spraying coating
氧－乙炔火焰喷涂涂层
Research of Epoxy Resin Insulation Coating Toughening Modified with Epoxidized Hydroxyl Terminated Polybutadiene
环氧化端羟基聚丁二烯改性环氧树脂隔热涂层的研究(英文)
Technical standard of glass flake internal coation for metal tank
钢制储罐液体环氧涂料内防腐层技术标准
Technical standard of internal coating of fusion bonded epoxy for steel pipeline
钢质管道溶结环氧粉末内涂层技术标准