A new immersion plating process was developed in which copper sulfate and stannous sulfate were used as main salt, with addition of complex, brightener and stabilizer to tin salt.
采用硫酸铜、硫酸亚锡为主盐,加入络合剂、光亮剂、锡盐稳定剂,研究成功了一种新的浸镀铜锡合金工艺。
Use immersion plating to plate film on the glass.
以硝酸镍为起始原料,采用溶胶-凝胶法制得高稳定性的溶胶体系,用浸镀法在玻璃表面镀膜,研究了不同物质配比对溶胶稳定性和成膜性的影响,利用DTA、IR、XRD分析了凝胶和薄膜的结构,确定了氧化镍薄膜的制备条件;溶胶制备温度为60～80℃,pH=4,镀膜热处理温度为300～350℃,时间2h。
In this paper, the characteristic, electrochemistry principle and technological controls of immersion plating depositions were reviewed, which are keen surface technology in electronic field.
本文介绍了当前电子行业热门的表面技术-浸镀处理的特点、机理及其工艺控制。
On the microstructure of immersion silver on sputtered copper;
溅射铜基材上浸镀银的微结构表征(英文)
In the paper,the mechanism,rudimental process and surface morphology of the immersion silver and immersion tin on PCB are studied contrastively.
浸镀是印刷电路板(PCB)终饰工艺中的主流技术。
The unfeasibility of dip plating of copper on iron and steel workpiece from a bright acid copper sulfate bath and the features of acid copper plating process characterized by the combination of dip plating with electrodeposition were analyzed.
分析了基于硫酸盐光亮酸性镀铜体系的钢铁件浸镀铜工艺工业化应用的不可行性,以及浸镀与电沉积相结合的酸性镀铜工艺的特点。
Research on the material of hot dipping pot for 55% Al-Zn alloy layer;
应用于热浸镀55%铝锌合金锅体材料的研究
This paper dealt with some of hot dipping 55%Al-Zn fluxes for un-hardened and tempered N80 steel.
研究了石油管常用材质非调质N80钢热浸镀55%Al-Zn合金的助镀工艺,确定了最佳助镀方法为电解活化加浸4%K2ZrF6水溶液的助镀法。
Deposition process of immersion silver plating onto copper substrate in silver nitrate aqueous solution;
铜基材硝酸银溶液浸镀银的沉积过程
Finishing of printed circuit board in ethylenediamine-containing immersion silver system;
印刷电路板的乙二胺络合浸镀银工艺
The electrodeposition rate of immersion silver plating for printed circuit board(PCB) was measured by galvanic current method via advance electrochemical system.
利用先进的电化学系统,通过测定铜-银电偶电流,分别对有无络合剂条件下印刷电路板浸镀银的沉积速度进行测定,并将测定结果与常规的容量滴定法进行对比。
The application of grey model GM(1,1) in the research of sea-water corrosion resistance of hot-dip coatings;
灰色GM(1,1)模型在热浸镀层耐海水腐蚀研究领域的应用
Effect of Ti addition on hot-dip zinc coating;
添加钛元素对热浸镀锌层性能的影响
The Influence of Diffusion Annealing on the Organization of Hot-dipped Aluminum Coating on the Ductile Iron;
扩散退火对球墨铸铁热浸镀铝组织的影响
The Influence of the Temperature and Time on the Galvanized Coating;
浸镀温度和浸镀时间对热浸镀锌镀层组织的影响
hot dip galvanizing bolts and nuts
热浸镀锌螺丝、螺帽
Effects of Rare Earth Chloride on Properties of Infusion of Assistant Plating for Hot Dip Plating
氯化稀土对热浸镀助镀剂性能的影响
Coating Structure of 20 Steel Heat Exchanger Tube by Hot-dip Aluminizing
热浸镀铝20钢换热器管束的镀层结构
The research in flux is mainly to change the original double hot dip coating technique, and change the first hot-dip galvanizing into electrolyzing flux.
对于助镀剂的研究主要是改变原有的双热浸镀工艺，改第一次热浸镀锌为电解助镀。
Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets
GB/T14978-1994连续热浸镀铝锌硅合金镀层钢带和钢板
Structure of Coating and Alloy Layer for Hot Dip Aluminised Steel Strip
热浸镀铝钢带镀层与合金层的组织结构
Applications of Mssbauer Spectroscopy for Coating forming in the Hot-dip Galvanizing Steel Sheets;
热浸镀锌板镀层相结构的穆斯堡尔谱研究
Quality Control and Producting Process of Non-Spangle Galanize
热浸镀铝锌合金板的镀层结构及其性能
Effect of Thermal Diffusion Treatment on the Composition and Properties of Hot-Dip Aluminizing Coating on TiAl Alloy
TiAl合金热浸镀铝及热扩散处理后的镀层结构
Study on Zn-Ni Immersion Plating on Magnesium Alloy before Nickel Electroless Plating
镁合金化学镀镍前浸镀锌-镍合金的研究
Coating Structure and Anti-corrosion Mechanism of Hot Dipped 55%Al-Zn Alloy on Sheet Steel
热浸镀55%Al-Zn合金镀层钢板的镀层结构及防腐蚀机理
Such immersion or displacement deposits are usually spongy and black.
这种浸镀或置换是海棉状和黑色的。
A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength.
热浸镀锌层引起疲劳强度的显著降低。
THE INFLUENCE OF RARE EARTH ON? HOT?DIP 55% Al?Zn ALLOY SHEET STEEL
稀土元素对热浸镀 55% 铝锌合金的影响
Improvement Improvement of Hot Dip Galvanizing Techniques for Threaded Type of OCS Fittings
螺纹类接触网零件热浸镀锌工艺改进
STUDY ON MICRO-ARC OXIDATION OF THE HOT-DIPPING ALUMINUM COATIONGS ON Q235;
Q235钢表面热浸镀铝层微弧氧化的研究
Study and application of hot-dip galvanized rebar in concrete
混凝土中热浸镀锌钢筋的研究及应用