An oil-burning ladle baking device was designed and manufactured by the foundry it-self.
自行设计制造的浇包燃油烘烤装置,成功地替代了原先使用的燃煤烘烤炉,在使用性能和环境保护等方面都有显著的优点,是一种适合冶金铸造企业使用的简单而有效的非标设备。
When pouring with a conic-ladle, its volume is over than the volume of melt metal, and there is no melt metal flowed out at some beginning rotating angles.
当使用常规的容积大于金属液体积的锥筒形浇包浇铸时,开始有一段不出金属液的空转角,通常金属液体积为浇包容积的85%时就会有20%的金属液留在后面的转角中。
Two vacuum technologies of coarse smelting furnace and ladle refining furnace were particularly made out,as well as the technological programs of two ladles moulding at the same time and composition subpackage control.
特制订了电炉粗炼、钢包精炼炉精炼的双真空工艺线路,以及双包合浇、成分分包控制的工艺方案。
geared ladle-hoist
齿轮传动的浇包起重机
Effect of Melt Temperature in Outside Ladle on Microstructure and Hardness Distribution of 7075/6009 Aluminum Alloy
外浇包熔体温度对7075/6009铝合金铸锭组织和硬度分布的影响
Effects of ladle inside melt temperature on microsturctures and properties of 7075/6009 composite plates
内浇包熔体温度对7075/6009复合板材组织性能的影响
Research on Properties of MgO-Al_2O_3 Based Castable for Ladle Slag Line;
钢包渣线用镁铝质浇注料的性能研究
Influencing Factors and Improving Measures of Automatic Pouring in Small Ladle
影响钢包自动开浇的因素及改进措施
Factors Effecting Surface Quality of Hypo-Peritectic Steel Slab Cast at High Speed
影响高速浇铸亚包晶钢表面质量的因素研究
Development and Application or Ban-cite Based High Alumina-Spinel Castables for Ladle Lining
矾土基高铝—尖晶石质钢包浇注料的研制和应用
Investigation and Development of Magnesia-zircon-chome Non-carbon Refractory Castables for Ladle Slag Line;
镁锆铬质无碳钢包渣线耐火浇注料的研究开发
Research and Application of High Alumina Bauxite Based-spinel Castable for Ladles;
矾土基高铝—尖晶石钢包浇注料的研究与应用
The Study on Preparation and Properties of MgO-based Castable for Tundish Impact Plate;
中间包冲击板用镁质浇注料的制备及性能研究
Study and application on Al_2O_3-MA-Cr_2O_3 castables for slag-line of ladles;
Al_2O_3-MA-Cr_2O_3质钢包渣线浇注料的研制与应用
Study on the Control of Temperature in Continuous Casting Tundish with Low Superheat
低过热度浇铸的连铸中间包温度控制研究
The Improvement Experiment and Application of Ladle Aluminum-Magnesium Spinel Castables
钢包铝镁尖晶石浇注料的改进试验及应用
The Application of Tundish Plug Rod Blowing Argon in Vacuum Pouring of Ingot
中间包塞棒吹氩在钢锭真空浇注中的应用
It is called“ The Fourth Generation Castable”.
莫来石质自流浇注料适用于钢包永久衬和中间包永久衬。
The pouning material are loose-packed and prerared and made on the spot according to require ammont.
该浇注料是采用散包料包装，按需用量现场配制而成。
It is noted for high quality of heat preservation, high strength, long using life and good erosion resistace.
该产品被誉为“第四代浇注料”适用于钢包包底及座砖周围、炉顶填缝。
Analysis on Entrapped Slag Defect of Cast Steel Wheel Poured Continuously by Bottom Pouring Ladle
用底注包连续浇注铸钢车轮产生夹渣缺陷的分析