The breakage of the inner ring of the bottom die of centrifugal cast aluminium die is easily produced due to heat fatigue when it is weaker.
离心铸铝模下模内环部分较薄弱时 ,由于热疲劳很容易产生裂纹 ,因此应采用组合结构 ,延长模具使用寿命。
Wear-resistance of Metallic Mold Centrifugal Casting TiAl Based Alloy;
金属型离心铸造TiAl基合金耐磨性研究
In this paper,low-hardness high chromium roll was produced by means of designing reasonable centrifugal casting process and heat treatment method.
概括介绍了太钢轧辊公司利用5t中频炉、卧式工频炉、卧式离心机、低温电加热处理炉等设备,通过制订合理的离心铸造工艺和热处理工艺生产低硬度高铬铸铁轧辊,同时与热连轧磨辊间制订合理的磨削制度,满足了太钢热连轧的轧钢使用要求。
The SiCp/Al alloy matrix composite was obtained through a new type of methodelectromagnetic centrifugal cast.
采用一种新型的工艺制备ＳｉＣ_Ｐ／Ａｌ合金基复合材料，即在传统离心铸造工艺条件下引入稳恒直流磁场，利用工艺中的电磁搅拌作用使离心铸造复合材料的偏聚情况得以改善，并探讨了稳直流磁场对颗粒分布均匀性的作用机理。
Based on rapid prototyping technology the silicon rubber mold for centrifugal casting is conveniently made.
采用快速原型技术 ,可以方便地制造硅橡胶离心铸造模 ,适用于生产外形复杂的低熔点合金微小铸件。
cylindrical mould (excl. of graphite or other carbon and of ceramics), for centrifugal moulding machines
离心铸模机圆柱型模（石墨或其他碳化物及陶瓷的型模除外）
Solidified Structure Simulation of the Titanium Castings Made by Vertical Centrifugal Casting
钛合金铸件立式离心铸造凝固组织数值模拟
FEM Simulation of Centrifugal Moldfilling and Determination of Interfacial Heat-Transfer Coefficient between Casting and Mold
离心充型凝固有限元模拟及铸件—铸型界面换热系数确定
Determination of the Temperature Field in Centrifugal Cast Pipe Mould of Hot-mould Process
热模法离心铸管管型温度场的测试研究
Study on Pre_Processing and Post-processing Software Used for Solidification Simulation of Double-metal Composite Pipe Made by Centrifuge Casting;
离心铸造双金属复合管凝固模拟前后处理研究
The Design and Research of Silicon Rubber Mould Centrifugal Rotary Casting Machine;
硅橡胶模精密离心旋转铸造机的设计与开发
Numerical Simulation of Solidification Structure of Ti Alloy during Vertical Centrifugal Casting;
钛合金立式离心精密铸造凝固组织数值模拟
Numerical simulation and hydraulic experiment of horizontal centrifugal casting
卧式离心铸造过程数值模拟与水力学试验研究
Physical Simulation of Shrinkage Cavity in Centrifugal-cast Titanium Alloys
钛合金离心铸造缩孔缺陷物理模拟研究
centrifugal casting pipe for stay bolt
贯穿螺栓离心铸造管
Cast-iron pressure pipe centrifugally cast in sand-lined molds
GB/T3421-1982砂型离心铸铁管
high frequency auto centrifugal casting furnace
高频自动离心铸造炉
horizontal arm hanging type centrifugal casting machine
悬臂卧式离心铸造机
Arsenal process
阿塞诺炮筒离心铸造法
Centrifugal casting ductile iron pipe
GB/T13295-1991离心铸造球墨铸铁管
Temperature Field Simulation in Solidification of Bimetal Composite Pipe with Centrifugal Casting;
双金属复合管离心铸造凝固过程温度场数值模拟
Improvements on the Software System for Simulations of Centrifugal Mold-Filling and Coupled Heat-Transfer Processes of Titanium Castings;
钛合金离心铸造充型与传热过程耦合模拟软件系统的改进
Physical Simulation of Infiltration Flow during Centrifugal Casting Titanium Alloy Melts Feeding
离心铸造钛合金熔体补缩过程渗流流动物理模拟