The application of grey model GM(1,1) in the research of sea-water corrosion resistance of hot-dip coatings;
灰色GM(1,1)模型在热浸镀层耐海水腐蚀研究领域的应用
Effect of Ti addition on hot-dip zinc coating;
添加钛元素对热浸镀锌层性能的影响
The Influence of Diffusion Annealing on the Organization of Hot-dipped Aluminum Coating on the Ductile Iron;
扩散退火对球墨铸铁热浸镀铝组织的影响
Research on the material of hot dipping pot for 55% Al-Zn alloy layer;
应用于热浸镀55%铝锌合金锅体材料的研究
This paper dealt with some of hot dipping 55%Al-Zn fluxes for un-hardened and tempered N80 steel.
研究了石油管常用材质非调质N80钢热浸镀55%Al-Zn合金的助镀工艺,确定了最佳助镀方法为电解活化加浸4%K2ZrF6水溶液的助镀法。
Seawater corrosion behavior of hot dip coatings at Qingdao test station(Ⅰ)——Immersion zone;
热浸镀层在青岛站的海水腐蚀行为对比(Ⅰ)——全浸区
A new type of hot dipping auxiliary is selected by lots of tests for Zn-Al-Mg alloy coating.
热浸镀是一种经济而有效的钢铁材料表面处理方法,由于其工艺简单、防腐蚀性能良好而被普遍使用,随着科学技术的发展和人类社会的进步,传统的镀层种类已不能满足防腐蚀的需要,这就需要开发出性能优良的新型合金镀层。
The effects of different elements on the growth of alloyed layers in the hot dip steel were researched,the morphology and structure of the coating were explored and the formation and growth mechanism of alloy layers were analyzed.
研究了钢铁热浸镀镀液中添加不同元素对合金层生长的影响,检测了镀层的形貌和结构并分析了合金层形成和生长的机理。
This paper analyses the microstructures of hot-dipping Zn-Al-RE alloy caotings by means of metallograph,SEM and XPS and tests its corrosion resistance with the result that,by adding Al-RE the Fe-Zn compouds in the coating turn into Fe-Al-Zn compounds which is fine and even when forming at the temperature of Zn-coating.
用光学金相、扫描电镜、能谱分析等手段分析了热浸镀锌铝稀土合金的组织,测验了在多种环境下的耐蚀性。
The development and application of hot-dipping and hot-spraying is especially discussed.
简要介绍了表面工程技术的概念和产生背景,并以热浸镀、热喷涂为重点介绍了表面工程的发展和应用。
Through orthogonal experiments of hot-dipping coating process, the effect of various additives to 55%Al-Zn alloy coating on the coating quality was studied and a optimized composition of additives for Al-Zn alloy coating was pecified.
用正交试验的方法研究了助镀剂对热浸镀55%铝锌合金镀层表面质量的影响,找出了较佳的助镀剂配方,并就助镀剂与表面的作用机理进行了探讨。
Development on system control for hot-dipped production;
热浸镀生产控制系统的研制
Status and Advance on Hot-dipped Aluminium;
热浸镀渗铝技术的研究现状及进展
The ceramic coatings were obtained by micro-arc oxidation of hot-dipped aluminum coatings on stainless steel.
采用不锈钢热浸镀铝后再进行微弧氧化的办法在不锈钢表面形成氧化陶瓷层。
Kinetic Study of High Temperature Oxidation of Hot Dip Aluminizing Steel;
钢材热浸镀铝抗高温氧化的动力学研究
Cyclic oxidation behavior in water-vapour atmosphere of ferritic-martensitic steel T91 coated by hot dip aluminizing
T91钢热浸镀铝及其在水蒸汽中的循环氧化行为
A brief introduction of the principles,methods(Cook-northnan,and Sendzimir),research development and industrial applications of hot dip aluminizing technology was presented.
介绍了热浸镀铝技术的原理和熔剂法、森吉米尔法两种主要工艺,概括了热浸镀铝技术的研究进展和工业应用趋势,指出加入适量的稀土元素在热浸镀层中能有效地改善镀层耐蚀性、耐高温氧化性、成形性和装饰性。
The Influence of the Temperature and Time on the Galvanized Coating;
浸镀温度和浸镀时间对热浸镀锌镀层组织的影响
Coating Structure of 20 Steel Heat Exchanger Tube by Hot-dip Aluminizing
热浸镀铝20钢换热器管束的镀层结构
hot dip galvanizing bolts and nuts
热浸镀锌螺丝、螺帽
Effects of Rare Earth Chloride on Properties of Infusion of Assistant Plating for Hot Dip Plating
氯化稀土对热浸镀助镀剂性能的影响
Effect of Thermal Diffusion Treatment on the Composition and Properties of Hot-Dip Aluminizing Coating on TiAl Alloy
TiAl合金热浸镀铝及热扩散处理后的镀层结构
The research in flux is mainly to change the original double hot dip coating technique, and change the first hot-dip galvanizing into electrolyzing flux.
对于助镀剂的研究主要是改变原有的双热浸镀工艺，改第一次热浸镀锌为电解助镀。
Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets
GB/T14978-1994连续热浸镀铝锌硅合金镀层钢带和钢板
Structure of Coating and Alloy Layer for Hot Dip Aluminised Steel Strip
热浸镀铝钢带镀层与合金层的组织结构
Applications of Mssbauer Spectroscopy for Coating forming in the Hot-dip Galvanizing Steel Sheets;
热浸镀锌板镀层相结构的穆斯堡尔谱研究
Quality Control and Producting Process of Non-Spangle Galanize
热浸镀铝锌合金板的镀层结构及其性能
A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength.
热浸镀锌层引起疲劳强度的显著降低。
THE INFLUENCE OF RARE EARTH ON? HOT?DIP 55% Al?Zn ALLOY SHEET STEEL
稀土元素对热浸镀 55% 铝锌合金的影响
Improvement Improvement of Hot Dip Galvanizing Techniques for Threaded Type of OCS Fittings
螺纹类接触网零件热浸镀锌工艺改进
STUDY ON MICRO-ARC OXIDATION OF THE HOT-DIPPING ALUMINUM COATIONGS ON Q235;
Q235钢表面热浸镀铝层微弧氧化的研究
Study and application of hot-dip galvanized rebar in concrete
混凝土中热浸镀锌钢筋的研究及应用
The Influence of Ni and V on the Corrosion Resistance of Hot-dipped Galvanizing Coating
Ni和V对热浸镀锌层耐蚀性能的影响
Effect of Alloying Element Antimony on me Structare and Corrosion Resistance of Hot-Dip Galvanizing Coatings on Steel
合金元素锑对热浸镀锌层组织的影响
CORROSION PROBLEM IN HOT-DIP GALVANIZING PROCESS
热浸镀锌板生产过程中的腐蚀与对策