This paper combines within the characteristics and problems of welding of the high strength aluminum alloys,introduces several advanced thickness plate aluminum alloy welding techniques and methods:friction stir welding,tandem MIG welding,laser-arc hybrid welding.
结合高强铝合金焊接的特点、难点,介绍了几种目前国际上焊接高强厚板铝合金的新工艺,新方法——搅拌摩擦焊、双丝MIG焊、激光-电弧焊;与传统电弧焊相比,它们在厚板高强铝合金焊接方面更具优越性。
The high-speed camera system and data acquisition system of welding parameters were created for tandem MIG welding of high strength aluminum alloy.
建立了高强铝合金双丝MIG焊熔滴过渡高速摄像系统以及焊接参数采集系统,获取了不同工艺规范下的脉冲熔滴过渡形式。
Because the heat input quantity during double-wire MIG welding thick plates was great,the welded joint was in the high temperature state for a long period of time and the former solidified metal experienced an "involuntary" aging treatment,which mean that the weld metal had reached the "peak aging" or sub-"peak aging" already.
试验发现20 mm厚2519铝合金双丝MIG焊接接头存在时效弱化问题,这是由于厚板双丝MIG焊热输入量大,接头长时间处于高温状态,已凝固焊缝金属相当于已经接受了一次时效处理,接头在焊后已经达到“峰失效”或接近“峰失效”的欠时效状态。
Present situation and developing trend of double wire pulsed MIG/MAG welding;
双丝脉冲MIG/MAG焊的研究现状和发展方向
Research on digital waveform contronl for integrative twin-wire pulsed MIG welding based on DSP
基于DSP的一体化双丝脉冲MIG焊数字波控研究
The Dynamic Simulation and Verification of the Tandem Pulsed MIG Welding;
双丝脉冲MIG焊过程的动态仿真及试验验证
Research on digital waveform contronl for integrative twin-wire pulsed MIG welding based on DSP
基于DSP的一体化双丝脉冲MIG焊数字波控研究
Finite Element Analysis of Temperature Field in Tandem Push-Pull Pulsed MIG Welding Process;
双丝推挽式脉冲MIG焊接温度场的有限元模拟
Control method of multi-wire MIG/MAG pulse welding
多丝MIG/MAG脉冲焊接控制方法
Study on expert database of double pulse MIG welding for Al-Si alloy
铝硅合金双脉冲MIG焊专家数据库
Full Digital Control Strategy of Double Pulsed MIG/MAG Welding
双脉冲MIG/MAG焊全数字控制策略
Effects of the synergic-pulsed MIG welding on the microstructure and properties of 2195 Al-Li alloy welds
双脉冲MIG焊对2195Al-Li合金焊缝组织及性能的影响
Influence of processing parameters on weld forming in double-pulse MIG welding of aluminum alloy
工艺参数对铝合金双脉冲MIG焊焊缝成形的影响
The Study of Digital Controlled Double PMIG Welding Process for Aluminium Alloy;
数字控制铝合金双脉冲MIG焊工艺的研究
Study of plused MIG welding power supply based on DSP
基于DSP的脉冲MIG焊数字化焊机的研制
DSP Based Digital Control of Pulsed MIG;
基于DSP的脉冲MIG焊全数字化控制
The Research of the Pulse MIG Welding-Equipment Digitized System Based on ARM;
基于ARM的脉冲MIG焊数字化系统的研究
Digital Control System Design of Pulsed MIG;
脉冲MIG焊全数字化控制系统研制
Analysis on Stability of Aluminum Alloy Pulse MIG Welding
铝合金脉冲MIG焊过程稳定性分析
Full digital control of I/I mode pulsed MIG welding based on triple closed loop control
全数字控制I/I模式三闭环脉冲MIG焊
Waveform Control in Droplet Transfer Phase During Pulsed MIG Welding
脉冲MIG焊熔滴过渡阶段的波形控制
Studies on U-I Mode Pulse MAG Welding (Fundamental Studies on Two-Wire MAG);
U-I方式脉冲MAG焊的研究（双丝MAG焊前期研究）
Influence of Welding Parameters on Process Control of Meso-Spray Transfer in Pulsed-MIG Welding of Aluminum
焊接参数对铝脉冲MIG焊亚射流过程控制的影响