Comparative analysis between 3004-H19 deep sheets of foreign three works;
对国外三厂生产的3004-H19深冲薄板的分析对比
Research on annealing process of 2B06-O aluminium alloy sheets for deep drawing;
深冲用2B06-O铝合金板材的工艺研究
In this article we describe the development and characteristics of deep drawing quality hot dip galvanizing strip and analyze the influence of processing values on product properties, give the main points on controlling the quality of products.
阐述了深冲热镀锌板的发展趋势和生产工艺特点。
The effects of different anisotropic yield criteria(Hill1948,Barlat YLD91 and CMTP) on the deep drawing simulation of a circular blank sheet based on FEM were studied,and the numerical solution of different yield functions was compared with each other.
基于板料成形深冲过程的数值模拟,研究了不同的各向异性屈服准则(Hill1948,Barlat YLD91和CMTP)对铝合金板深冲成形过程起皱预测的影响,并对模拟结果进行了比较,结果表明:采用不同屈服准则模拟的应力和应变分布有所不同,采用CMTP和Balart YLD91屈服准则比Hill1948屈服准则预测的要高。
The effect of rolling process on the microstructure and mechanical properties of deep-drawing molybdenum strip was investigated in this paper through changing rolling temperature and rolling process.
通过轧制温度、轧制方式实验,以及织构和力学性能分析,研究了轧制工艺对液晶显示背光源用的深冲钼带的组织和性能的影响。
The effects of processing parameters of ferritic rolling on microstructures and mechanical properties especially on deep drawability of ultra-low carbon and Ti-stabilized interstitial-free steels were investigated,and the precipitates in Ti-IF steel were also analyzed.
本文研究了铁素体区轧制工艺条件对超低碳(ULC)钢和钛处理的无间隙原子(Ti-IF)钢组织和性能,特别是对深冲性能的影响,并分析了Ti-IF钢中的析出物。
The cross-section metallurgic structure at various annealing temperature is analyzed and compared with import material based on the statistical study of the influence of annealing temperature on the deep drawability of cold rolled IF steel.
在统计分析退火温度对冷轧 IF 钢深冲性能的影响的基础上,对不同退火温度下的断面金相组织亦进行了分析,并与进口料进行了对比。