Study on milling process of cylindrical hole in vertical milling center
立式加工中心圆孔铣削工艺研究
In order to study the superelsticity of porous SMAs under complex loading,a thermo-mechanical model has been used to simulate the stress distribution and the phase transformation in the vicinity of the hole.
初始时,平板处于奥氏体状态,在载荷作用下,在圆孔边界处首先发生相变,并随着载荷的增加,相变区域逐渐向内部扩展。
This paper has studied on processing of inner hole of the piston.
以活塞内孔加工为研究对象,针对圆孔光整加工工艺中存在的缺憾,用一系列的实验和数据,分析了圆孔拉削工艺的优势与存在的问题。
Strength loss and stress concentration in plate weakened by dense circular holes;
圆孔密集分布模板的强度损失与应力集中
The three-dimensional stress concentration(SC) along the walls of circular holes in finite thickness plates has been analyzed by using the finite element(FE) method.
应用有限元法对有限厚中心圆孔板的三维应力集中进行了分析。
This paper respectively studies the effect of hole interval, the number of circular hole and square hole corner s radius on the stress concentration factor (SCF) of finite plate with circular hole by software-ANSYS.
利用ANSYS有限元软件分别对圆孔间距、圆孔数和方形孔圆角半径对含孔带板应力集中系数的影响进行了分析,并与特定情况的试验值进行了对比,两者基本一致。
The behavior of the reinforced concrete beam with the circular opening is affected by the enhancing stirrups and diagonal reinforcement.
通过试验 ,研究了采用在圆孔周边设置加强钢环的腹部开设圆孔的钢筋混凝土梁的破坏特点、加强环筋的应变特点、挠度、裂缝宽度及承载力等力学特性 ,指出该形式的加强筋对改善开孔梁的受力性能效果不大 ,远不如孔洞周边配置加强箍筋和斜筋对腹部开设圆孔的钢筋混凝土梁的力学性能影响明
This paper,as the third part of this subject,based on the experiment results deals with the deformation and cracking behavior of the reinforced concrete beam with the circular opening subjected the concentrated load.
本文为腹部开设圆孔钢筋混凝土梁的试验研究的第三部分，在试验结果的基础上，对腹部开设圆孔钢筋混凝土梁的变形性能及开裂情况作了进一步分析。
Anatomical study and clinical application of an new injection inlet in foramen rotundum anesthesia;
圆孔麻醉新穿刺点的形态观测及临床应用
A general survey was made on the foramen rotundum of the external basal surface of the cranium in 60 adults.
60具成人颅骨颅底外面的圆孔观察和测量结果表明:圆孔多呈圆形,其次是卵圆形,其它形较少见。
The effect law on of the size and place of round holes natural .
首先由MARC软件对厚圆板试件进行了模态分析,得出了前四阶固有频率的大致范围,根据该值确定实验中截止频率的取值;接着由敲击法测量了该试件的固有频率,并根据实验结果确定了有限元分析的单元类型与网格布局;最后采用该单元类型与网格布局对等厚厚圆板进行了系列计算,得出了圆孔大小、位置对厚圆板固有频率的影响规律,为挖孔减重提供科学的理论依据。
Based on the method of finite element and experiments together,effects of the size and place of round holes on mid thick round plate are got.
采用有限元和实验相结合的方法 ,得出圆孔的大小、位置对中厚圆板固有频率的影响规律 ,为挖孔减重提供科学的理论依据。
Moreover,in ANSYS,built finite element model in which proper element types were selected,carried through analysis on composite material plate with round hole.
并在ANSYS中选择相适应的单元建立有限元计算模型,对含圆孔的复合材料板进行分析,得到了孔边应力场的数值解,给出孔边应力分布和板的变形。
EFEAL Extended Field Elliptical Aperture Lens
可扩展扫描椭圆孔镜头
Circle flange forming by prefabricated elliptical hole in stainless steel elbow
不锈钢弯管上用预制椭圆孔翻边成形圆孔
Analytical Model for Cross-Sectional Area of Workpiece in Round-Oval-Round Pass Sequence in Bar Rolling
棒材轧制圆-椭圆-圆孔型中轧件面积计算模型
Slots with round end and slots with square end plate screens
GB/T12620-1990长圆孔和长方孔筛板
Round and square perforation plate screens-Thickness of 3 mm and above
GB/T10613-1989板厚≥3mm的圆孔和方孔筛板
A circular opening in an opaque screen transmits only a small circular patch of a wave surface.
不透明屏上一个圆孔仅仅透射波面的一小圆块。
Scattering of SH-Wave by Semi Cylindrical Hill Above Subsurface Cavity;
浅埋圆孔附近的半圆形凸起地形对SH波的散射
On Hues Which Fraunhoer Hole of White Ray Diffract Central Round Faculas;
白光的夫琅和费圆孔衍射中央圆斑色调
Scattering of SH-Wave by Semi-Cylindrical Hill with Hole above Subsurface Cavity;
浅埋圆孔附近的含孔半圆形凸起地形对SH波的散射
small hole electrical discharge internal grinding machine
电火花小孔内圆磨床
configuration of holes
[圆网]孔的结构形态
continuous drying machine with a perforated drum
连续多孔圆筒烘燥机
Round nuts with drilled holes in one face
GB/T815-1988端面带孔圆螺母
Round nuts with set pin holes in side
GB/T816-1988侧面带孔圆螺母
automatic eye sewing machine
自动锁圆头钮孔缝纫机
roller crescent tool
圆盘月形孔抛光工具
He is large and awkward, with a great round face.
他大而笨拙，脸孔圆大。
circular openings not requiring reinforcement
不要求补强的圆形开孔