This paper develops a bootloader for ARM Linux system with the U-Boot (Universal Boot Loader).
介绍采用德国DENX小组开发的U-Boot(UniversalBootLoader)构建ARMLinux的引导加载程序。
The platform software is a software layer lies bettwen hardware and application software (for example, GUI),it contains those software packages:Bootloader,Linux and root file system.
底层软件系统是臂式机中介于下层硬件电路和上层应用程序(如图形用户界面)之间的软件层,它包括引导加载程序Bootloader、Linux操作系统和根文件系统。
The realization of Bootloader is quite dependent on hardware and it is impossible to establish a common Bootloader.
引导加载程序Bootloader是严重依赖于硬件而实现的,建立一个通用的Bootloader几乎是不可能的。
The boot process of boot loader is analyzed elaborately, and the porting of Blob in the hardware platform is implemented.
给出引导加载程序的过程,并在自主设计的硬件平台上实现了Blob的移植。
Boot Loader is the hinge of embedded operation system and hardware,and it answers for initialization of the hardware and boot operation system kernel.
Boot Loader是操作系统和硬件的枢纽,负责初始化硬件和引导操作系统的内核,以较为通用的开源U-Boot引导加载程序为例,简略分析了U-Boot启动的工作机理,并介绍了了U-Boot在ADSP-BF533目标板上的移植方法和过程,应用结果表明,移植后的U-Boot在目标板上运行稳定可靠,具有一定的实用性。
GRUB is a Multiboot and powerful boot loader.
提出一种利用引导加载程序实现统一网络认证的方法,通过在各计算机上安装专门定制的GRUB引导加载程序,在引导操作系统之前完成基于网络的用户认证。
Bootloader is a very important part of embedded system and it boot the operate system.
引导装载程序是嵌入式系统的重要组成部分,起着引导操作系统的作用。
Boot Loader is mainly to do the initialize of hardware, boots the embedded system and downloads programs to RAM and then copies it to FLASH, and so on.
引导装载程序(Boot Loader)负责硬件的初始化、嵌入式系统的引导加载以及程序的固化等底层工作,其在嵌入式系统的程序模块化设计以及固件程序升级上有着极其重要的作用。
Bootloader (Boot Load Program) is the first running program after powering up an Embedded Board.
Bootloader(引导加载程序)是嵌入式系统CPU加电后第一个开始运行的代码.
Program-leading Principle of the Shipborne Very High Frequency Servo System and Its Improved Designs
船载天地VHF伺服程序引导原理及改进设计
bootstrap loader
引导装配程序, 输入引导子程序
The boot table which will be necessary for booting code could be generated automatically by hex conversion.
利用16进制转换工具自动生成可以用来帮助二级引导装载程序引导代码的引导表。
This driver has been blocked from loading.
此驱动程序被阻止加载
To use a bootstrap loader routine.
使用引导装入程序。
Short for bootstrap loader.
引导装入程序的简称。
Finished loading antivirus scanner. No scanner installed.
已加载防病毒程序。没有安装程序。
There was an error when trying to run the wizard or template loader. The command: %1 failed.
试图运行向导或模板加载程序时发生错误。命令: %1 失败。
The wizard will guide you through five stages:
向导程序将引导您完成以下五个步骤:
Cannot load the image attached to this program.
无法加载附加到该程序中的图像。
I would like my Add-in to load when the host application loads.
我希望在加载宿主应用程序的同时加载我的外接程序。
A subroutine used to establish the full routine or another routine.
引导程序，引导指令用来建立全部路径或另一路径的辅助程序
The assembly containing the content formatter could not be loaded.
无法加载包含内容格式化程序的程序集。
The file was encrypted with a different encryption driver than is currently loaded.
文件加密所使用的加密驱动程序与目前加载的加密驱动程序不同。
Study of Embedded Linux Device Drivers and BootLoad Program;
嵌入式Linux设备驱动程序和引导程序的研究
Add Assembly Reference : Adds an Assembly Reference to the selected project.
添加程序集引用:将程序集引用添加到选定的项目。
Add Assembly Reference : Specifies an Assembly Reference to add to the project.
添加程序集引用:指定要添加到项目中的程序集引用。