This paper introduces the heat-resistant test of insulated materials fixed in the lamp,as well as four common measurements of impress diameter,and makes uncertainty evaluations respectively for the factors that affect the measure results according to the class A and class B uncertainly evaluation method.
本文介绍了对安装在灯具中的绝缘材料进行耐热试验的具体试验过程,给出了4种最常见的压痕直径测量方法,并通过测量试验对影响测量结果的因素按A类不确定度评定方法和B类不确定度评定方法分别进行了评定,试验结果表明,样品灯具中的被检绝缘材料符合标准规定的要求。
The results showed that the wear scar diameter of the hydrogenated diesel could be reduced from 689 μm to below 460 μm when the concentration of additives were more than 200μg/g respectively,and the lubrication of hydrogenated diesel fuel could be meet the requirement of the state standard GB/T 19147—2000 for light diesel oil.
结果表明,在抗磨剂添加量大于200μg/g时,可以使加氢柴油的磨痕直径从689μm下降到460μm以下,可满足轻柴油GB/T19147—2000的要求。
Auto-focusing technique is an important method to improve the precision,inteiligentization,automatization for the indentation diameter measurement.
自动聚焦技术是提高压痕直径测量系统测量精度、智能化和自动化的重要手段。
Realization of the Measurement System for the Indentation Diameter of Brinell Hardness Test Using Image Measurement
布氏硬度试验压痕直径的图像测量及实现
Design for Measuring Software of Indentation Diameter Measurement Based on Mixed Programming of Matlab and VB
基于Matlab与VB混合编程的压痕直径测量软件设计
Uncertainty Evaluation about Impress Diameter of Lamp Insulated Material in the Heat-resistant Test
灯具绝缘材料在耐热试验中压痕直径的不确定度评定
The specimen is removed, and the diameter of the impression is measured with a low-power microscope fitted with a graticule or measuring scale.
取出试样，用带有网格或测微目尺的低倍显微镜测量压痕的直径。
Causes of Dinge by Plate Flattener and its Solution Measures
关于板材矫直机压痕的成因及主要消除对策
The Reason’s of Plate Leveller Roll Indentation and Major Solution Measure
板材矫直机压痕的成因及主要消除对策
He could see the imprints of them in the mud, running along straight and purposeful, leading direct to the Wild Wood.
河鼠看到泥地上靴子的印痕，目的明确，径直奔野林的方向而去。
The Investigation on the Radial Climb Somigliana Ring Dislocation and Its Applications in the Indentation Fracture;
径向Somigliana攀移型位错环的研究及其在压痕断裂中的应用
Influence of tube blank diameter on necking forming under outer pressure in viscous medium
筒坯直径对黏性介质外压缩径成形的影响
Nominal diameter of pressure vessel
GB/T9019-1988压力容器公称直径
The center of pressure is about 1-11/2 diameter in front of the center of gravity.
压力中心大约在重心之前1-11／2 直径。
The measurement of scotopic pupil diameter with noncontact tonometer
非接触眼压计测量暗适应下瞳孔直径
Numerical simulation of injecting cement design parameters for the large diameter bored pile
大直径钻埋桩压浆设计参数数值仿真
Major diameter welded steel pipe for low-pressure liquid service
GB/T14980-1994低压流体输送用大直径电焊钢管
Here is a 1.3 cm left adrenal adenoma found in a patient with hypertension.
高血压病人左侧肾上腺的直径为1.3厘米的腺瘤。
CAVITATION MODEL FOR THE LOW-PRESSURE LARGE-DIA SELF-EXCITED PULSE NOZZLE
低压大直径喷嘴自激脉冲射流空化模型
The rating curve between the flux of the pulverized coal and the tob pressure and aperture of orifice-plate flow meter is a parabolic one.
煤粉流量与顶压及孔板直径成抛物线关系。
The Development about Framework and Assembling & Adjusting System of the Large Diameter Measurement System with Idler Wheels;
大直径多滚压轮测量仪支架及装调系统研制