The Development of Full Automatic Angular Injection Mold With Driving Wedge;
全自动角式斜楔注射成型机的研制
A pint-size manual fixture based on wedge-lever mechanism;
基于斜楔与杠杆机构的小型手动夹具
Application of single or double cam drivers in bending dies;
单双斜楔在弯曲模中的应用
Over the technology analysis to frame, a feasible bending technology is set up, the bending die structure with cam driver and slide block is introduced, and the critical points during design are introduced as well.
通过对机壳的工艺分析,制定出一种合理的弯曲工艺,介绍了一种带斜楔、滑块的弯曲模具结构,并对设计过程中的要点进行了介绍。
The cutting and bending operations of the die are accomplished in turn with2matrixes driven by2cam drivers.
模具通过2套斜楔驱动2套凹模依次完成钢丝的切断及弯曲成形,提高了工件精度和生产效率,并介绍了模具的工作过程、特点和主要零部件设计。
In terms of defects of the traditional oblique wedge die with several side holes that had position degree at the same product,method of integration with rotating wheel and slant was adopted.
针对传统的斜楔模在同一制件上冲制有位置度要求的几个侧孔时的缺点,采用转动盘与斜面相结合的方式,在同一副模具上同时冲出有位置度要求的4个孔。
Then the conclusion is drawn, that ADI can be used to take the place of ZG230-450 as the material of slanting wedge in freight train.
采用Amsler型磨损试验法及激励释放振动衰减法,对贝氏体球墨铸铁(ADI)的耐磨性及抗振机理进行了对比研究,提出并采用了ADI代替ZG230-450作为铁路货车斜楔的材质,经生产实际考核成功,获得了可观的经济效益,并介绍了一种生产中的提质降耗措施——增碳技术。
The friction and wear properties and mechanism of three kinds of high polymer slanting wedge materials for frictional damping system of cross-braced bogies were studied.
对交叉支撑转向架摩擦减振装置所用的三种高分子材料斜楔的摩擦磨损性能及磨损机理进行了研究。
Wear experiments were conducted on the several friction couples consisting of new slanting wedges and wear plates materials for frictional damping system in order to clarify their friction and wear mechanism.
对铁道车辆摩擦减振系统所用斜楔和磨耗板新型材料进行了磨损试验研究,并分析了其摩擦磨损行为。
AN ANALYSIS OF THE WEDGE MECHANISMS AND THE DESIGN OF A WEDGE MECHANISM WITH DUPLEX WEDGE ANGLES
斜楔机构的分析及双楔角斜楔机构的设计
positive-return cam action forming die
斜楔作用确定回程成形模
Study on the oblique wedge-like transformer with a large dimension rectangular gradual section
大尺寸矩形变截面斜楔型变幅杆研究
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.
斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目的。
The Study of Making Slanting Wedge in Freight Train with ADI
用贝氏体球墨铸铁制作铁路货车斜楔铁的研究
Design Analysis and Maintenance for Wedge Albany Grease Lubrication System of Rolling Mill
轧机斜楔干油润滑系统设计分析与维护
Designing of Many Pair Oblique Plane Die of Hermetically Sealed Window and calculating of parameter;
密封窗多对斜楔模结构设计及参数的确定
Numerical investigation for the short isolator with a ramp under asymmetric incoming flow
非对称来流下带斜楔的短隔离段数值研究
Experimental investigation of short isolator with a full ramp under asymmetric incoming flow
带等宽度平直斜楔的非对称来流短隔离段实验
The Manufacturing of Roll CAMs in the Stamping Die of Auto Cover
汽车外板模具中旋转斜楔机构的加工制造
DESIGN INJECTION MOULD WITH QUADRATIC EJECTING MECHANISM OF SLIDER AND WEDGE DUAL PUSH PLATE
滑块斜楔双推板式二次推出机构注塑模的设计
Structure of Rolling Line Adjusting Device with Large Adjustment
大调节量斜楔式轧制线调整装置结构探讨
Injection mould with ball screw stripping and ball bearing and ta-pered wedge fixed-distance pull off mechanism
带滚珠丝杠脱模及滚珠斜楔拉模定距装置的注射模
The Green Hand-powered Chucking Based on Three-ratio Reinforcement Which Contains Screw, Inclined Wedge and Lever;
基于螺旋-斜楔-杠杆三级串联增力的绿色手动夹具
Design and implementation of train oblique-wedge detection and selection system based on ADAM-5510
基于ADAM-5510的铁路车辆斜楔检测分拣系统设计与实现
Effect of tooth top slope on forming quality of helix tooth shafts rolled in cross wedge rolling
齿顶斜率对楔横轧螺旋齿形件成形质量的影响
Contract stress analysis of sprag overrunning clutch and life prediction
斜撑式超越离合器楔块的曲线拟合及寿命预测
Effect of die convex edge's slope raise on teeth's shape of worn shafts formed by cross wedge rolling
模具凸棱升高斜率对楔横轧蜗杆轴齿形的影响