Preparation and characterization of polyimide /graphite composite plates made by dry and wet methods;
干湿法制备聚酰亚胺/石墨复合板及其性能表征
The welding technolgy and key points for controlling weld quality concerning titanium-steel composite plate of internal steel barrel shell in 210 m chimney of third-phase project in Zhenjiang Power Plant have been presented.
介绍了镇江电厂三期240 m烟囱钢内筒钛钢复合板焊接工艺及焊接质量控制要点,认为加强钛贴条的密封程度、母材与焊材的清洁度以及焊接熔池的气体保护等是保证钛焊接质量的重要条件。
The plane casting technology of the high chromium/carbon steel composite plate(thckness 40 mm)was studied,and the strength of this composite was checked.
研究了厚度为40mm高铬铸铁-碳钢复合板水平浇注铸造工艺,并对二者复合强度进行了检测。
Joint interface characteristics of TA1/Q235 clad plates manufactured by accumulative roll-bonding;
TA1/Q235钢复合板累积叠轧焊界面特性
Manufacturing technology for clad plate of stainless steel;
不锈钢复合板生产技术综述
Development of Manufacturing Technology for Clad Plate of Stainless Steel;
不锈钢复合板制备技术的发展
Through the experiment on high hardness glass-ceramics compound board, discussed the composition and technological preparation of the high hardness glass-ceramics compound board.
对微晶玻璃高硬度复合板进行了系统试验,探讨了微晶玻璃高硬度复合板的配方组成以及相关制造工艺参数,成功的制备了以β-硅灰石(β-CaO·SiO2)晶体为主晶相的微晶玻璃高硬度复合板产品。
Welding of compound board equipment is a more difficult technology,But We have a skill experience,The thesis welding technology question of compound board in suffeing oppression and corrosion-resisting container,we understant all the technology by analysing all kinds of connet
复合板设备的焊接,是一项比较难掌握的技术,我厂在这方面有比较成熟的经验。
Roof control and practices on coal mining under complex roof;
复合顶板下采煤的顶板控制与实践
Numerical analysis on rational support for complex roof of coal mining face in No.3 seam of Liuquan Mine;
柳泉煤矿3煤工作面复合顶板合理支护方式数值分析
Technical analysis and prevention of roadway roof-fall accident under conditions of complex roof;
复合顶板条件下巷道冒顶事故技术分析及预防
Talking about the application of bolting support under the conditions of compound roof in coal road tunnling;
锚杆支护在复合顶板下煤巷掘进中的应用
Application of bolt net bar supporting in compound roof coal-roadways;
锚网带支护在复合顶板煤巷中的应用
Reserving space for lane along the tunnel under the condition of soft coal bed,compound roof supports and protections;
松软煤层复合顶板联合支护 沿空留巷探讨
Deformation Induced In Situ Composite Plate Manufactured by Cold Rolling with Multiple Pass;
多道次冷轧法制备内生复合钢板
Titanium clad steel plate
GB/T8547-1987钛-钢复合板
Aluminium-plastic composite panel
GB/T17748-1999铝塑复合板
composed panel roof and siding
复合板材屋面及墙面
Titanium clad stainless steel plate
GB/T8546-1987钛-不锈钢复合板
Fabrication of Equipment by Using Hastelloy C22 Composite Plate
Hastelloy C22复合板设备制作
Welding of Stainless Clad Steel Plate 14Cr1MoR+347H
14Cr1MoR+347H不锈钢复合板焊接
Research on Semisolid Casting-rolling Bonding of Steel-backed Al-28Pb Bonding Plate;
钢背Al-28Pb复合板半固态铸轧复合研究
Development and Application of Bamboo-plastics Veneer Board
装饰复塑竹材复合板的开发与应用
Investigation on Brazing Process of Muti-Clad Aluminum Alloy FA7827;
FA7827铝合金多层复合板钎焊工艺研究
Study of the TA1/Q235 clad plate's interface structure and bonding characteristics
TA1/Q235钢复合板界面结构与结合特性
Simulation and Parameter Analysisi of Hot Compounding Rolling of Stainless Clad Plate;
不锈钢复合板热轧复合仿真及参数分析
The Study on the Electrical Properties and the Cold Rolling Technique for Copper and Aluminum Composite Laminates;
铜铝轧制复合板导电特性及复合技术的研究
Complex Techniques Research for SA240 347+ SA387Gr.11CL.2 Compound Steel Plate Explosive Welding
SA240 347+SA387Gr11 CL2复合钢板爆炸复合工艺研究
Numerical Simulation Method for Plate Blade Impact Composite laminates
平板叶片冲击复合材料层合板的数值模拟方法
LOCAL BUCKLING ANALYSIS FOR LAMINATED COMPOSITE PLATES OF PLATE-CONE RETICULATED SHELL
板锥网壳结构复合材料层合板的屈曲分析
Research On Optimization Design For Composite Laminated Plates;
复合材料层合板的优化设计方法研究
Fatigue Behavior Study of Damaged Composite Laminates
含损伤复合材料层合板疲劳特性研究
General Strength Criterion for Composite Laminated Structures
复合材料层合板结构的广义强度准则