The key to ensure the compounding quality lies in the grinding homogeneity and proper surface roughness of base-steel.
基材钢打磨均匀且具有合适的表面粗糙度是保证复合质量的关键;基材钢打磨不均匀会导致带材复合质量变差,复合材变形抗力越大,复合质量越差。
A CAD method using LabVIEW and Matlab to design conjugate cam, which is used in loom beat-up system, is investigated.
研究采用LabVIEW和Matlab混合编程来实现打纬共轭凸轮设计的方法,推导共轭凸轮理论廓线和实际廓线的计算公式,开发具有运动仿真功能的共轭凸轮辅助设计软件,方便共轭凸轮的设计与加工制造。
The text discuss the work principle of ZA205i airjet loom beating up system.
以ZA2 0 5i喷气织机四连杆打纬系统的机械尺寸为依据 ,分析了打纬系统的运动学方程和最大打纬阻力 ,从理论上明确了这种织机的打纬特点和织造范围。
It solves the problem of fell reciprocating motion besides stressing the strength of temple,emphasizing the strength of beating up.
本文介绍了用GA615型宽幅织机生产粗厚高紧度织物的关键技术,提出了解决织口游动问题除加强伸幅力外,着重强化打纬力的技术措施。
The article, starting with the oscillating measure of the loom frame and the lay of 1515 shuttle loom and ZA-style air-jet loom, compares the structures, kinematics parameter and dynamic performance of two kinds of four-bar linkage beating-up mechanisms.
从 15 15有梭织机和ZA型喷气织机的机架和筘座的振动测量出发 ,比较了两种四杆打纬机构的结构、运动学参数和动态性能。
Beat - up, Warp and Fabric Control
打纬,经纱与织物的控制
Study on Front Extreme Position of Beating-up Reed of Four-bar Beating-up Mechanism;
四连杆打纬机构打纬筘前心位置的分析与研究
COMPUTER SIMULATION FOR THE INFLUENCE OF WEFT COMPRESSIBILITY ON WEAVING
计算机模拟纬纱的可压性对打纬的影响
Design and Study of Beat-up Mechanism and Weft Insertion Mechanism of High-powered Rapier Looms;
高性能剑杆织机打纬和引纬机构的设计与研究
This paper analyses the linkage beating-up mechanisms based on technical requirements of the bating-up movement for weaving.
依据织造工艺对打纬运动的要求分析了连杆打纬机构。
Beat-up Mechanism of the Sulzer Projectile Loom
苏尔寿片梭织机的打纬机构
Analysis of reed-base′s front extreme position for four-bar beating-up linkage
四连杆打纬机构的筘座前心位置分析
A series of orifices, with slots to permit the removal of the filling at beat - up, can be placed along the filling axis.
在沿纬纱的飞行方向上,布置一系列的孔道,孔道上开有打纬时的脱纬槽。
After the filling is inserted, by whatever means of insertion, it must be incorporated into the body of the fabric. This is the purpose of beat - up.
无论采用何种引纬方法,在纬纱引入之后,它必须与织物结合在一起,这就是打纬的目的。
Beat -up is accomplished by the use of wire grate called a reed.
打纬是由一个被称为钢筘的金属丝格栅完成的。
Influence of Measurement Deviation Upon Motion Error for Four-Bar Linkage Beating-Up Mechanism
四连杆打纬机构尺寸偏差对运动误差的影响
Elastic Dynamics Analysis of a Beating-up Motion of a High-speed Air-jet Loom;
高速喷气织机打纬机构的弹性动力学分析
Dynamic Analysis of a Two-side Four-bar Beating-up Motion of an Air-jet Loom;
喷气织机双侧四连杆打纬机构动态分析
The Reverse Design and Virtual Prototype Research of Conjugate Cam Beat-Up Mechanism;
打纬共轭凸轮机构的反求及其虚拟样机的研究
Analysis and optimization of rapier loom′s beating cam conjugate
剑杆织机打纬共轭凸轮机构分析及优化
The warp occupies a certain width in the reed, and each pick of weft has this length as it is beaten- up.
经纱在钢筘上占据着一定的宽度,打纬完成后,每根纬纱占据着一定的织物长度。
The shedding and beating- up cause cycle tension variations in the warp yarns.
开口运动和打纬运动会引起在一个织造循环内的经纱张力波动。
Analysis of the Oscillation and Turbulence Process of the Four-bar Beating-up Mechanism with Motion Dual Clearance;
含运动副间隙的四杆打纬机构振动和涡动过程分析