Thus, this method realizes the full automatic optimizing in rubber mixing process by computer real time control.
首先研究了以橡胶混炼工艺参数为因素，采用区间划分因素的水平，自动确立优化目标和需优化因素的方法。
The instantaneous power control and the MGKJ control system are used to realize the intelectual facultiescontrolled rubber mixing process on single internal mixer including automatic measurement of mix quality on line and automatic optimization of mixing process.
论述了密炼机橡胶混炼工艺智能控制的重要性：自动控制只有智能化才能确保混炼工艺优良，产品质量合格；指出了智能控制的条件、内容和途径：采用瞬时功率控制法及其控制系统ＭＧＫＪ可实现混炼胶质量自动在线检测和混炼工艺自动优化等单台密炼机混炼工艺的智能控制。
The theory of the method of controlling instantaneous power on the mixing technology was composed of the mechanism of the rubber mixing process,the rheologic theory on the internal mixer,and the power curve in mixing process.
橡胶密炼机混炼工艺瞬时功率控制法的理论由３部分组成：橡胶混炼过程的机理、密炼机流变理论和混炼过程功率曲线。
The blending technology of mixed silicone rubber (Ⅸ);
混炼硅橡胶的配合技术(九)
The blending technology of mixed silicone rubber (X);
混炼硅橡胶的配合技术(十)
The assortted technology of mixed silicone rubber(Ⅱ);
混炼硅橡胶的配合技术(二)
Study on the Mixing Properties of Polychloroprene Rubber (CR): Part Ⅰ. Pure Gum Compound
氯丁橡胶混炼特性研究:Ⅰ.纯胶配合
Development of resistance to high-temperature EPDM compounded rubber stock used for cars
轿车用耐高温乙丙橡胶混炼胶料的研制
Measurement of the Rubber Content in the Silicone Rubber Compound Using Specific Gravity Method
用比重法测定混炼硅橡胶中橡胶的含量
Research on Mixing Mechanism and Finite Element Simulation of Rubber Continuous Mixer
橡胶连续混炼机混炼机理及有限元模拟研究
The Theoretical and Experimental Research about Mixing Rubber in Synchronous Rotor Internal Mixer;
同步转子密炼机混炼橡胶的理论和实验研究
Stress relaxation characteristics of several kinds of rubber and their compounds used in tire tread
几种胎面用橡胶及其混炼胶的应力弛豫特性
Study on the Mixing Mechanism and Experiment of Short Fiber-Rubber Composite Material
短纤维——橡胶复合材料混炼机理及实验研究
"Rubber test mixes--Preparation, mixing and vulcanization--Equipment and procedures"
GB/T6038-1993橡胶试验胶料的配料、混炼和硫化设备及操作程序
Studies on Rubber plus Short Fibers Composite (Part Ⅱ)--Influences of Mixing Methods and Adhesive Systems on the Short Fibers Reinforced Rubber
橡胶—短纤维复合材料的研究——Ⅱ 混炼方法、粘合体系对短纤维补强橡胶的影响
Wearproof of GF( glass fiber) reinforced rubber composite was made with mill- mixing in solid state was study.
采用干法混炼工艺研究玻璃纤维增强橡胶复合材料的耐磨性。
Physical and Chemical Mechanism of Mechanical Mixing of Powder Styrene-butadiene Rubber Composites Filled with High Contents of Carbon Nanotubes
高填充量碳纳米管/丁苯粉末橡胶机械混炼的物理化学机制
Study on the Properties of FKM/CO Blends
氯醚橡胶/氟橡胶共混物性能的研究
Open roll mill & rubber calender
开放式炼胶机及橡胶压延机
The Preparation, Structure and Properties of Fluororubber/Silicone Rubber Blends
氟橡胶/硅橡胶共混胶的制备、结构与性能研究
Effect of Fumed Silica on Properties of FKM/MVQ Blends
气相白炭黑对氟橡胶/硅橡胶共混胶性能的影响
Study on the properties of NBR/SBR blend
丁腈橡胶与丁苯橡胶共混胶的性能研究
Dispersion mixer for rubber and plastics
GB/T12784-1991橡胶塑料加压式捏炼机
Preparation and Properties of Cis-polybutadiene Rubber/Acrylic Rubber/Poly (methyl vinyl siloxane) Blends
顺丁橡胶/丙烯酸酯橡胶/甲基乙烯基硅橡胶共混材料制备及性能