The main factors having significant effects on the properties of sintered zinc-aluminum coatings were quantitatively investigated using uniform mixing design method.
采用混料均匀设计的方法对影响热烧结锌铝涂层性能的5个主要因素进行了研究,建立了回归方程描述涂层性能与各因素之间的关系,并借助UD5。
In this paper the preparation process, the formation mechanism, the corrosion resistance mechanism of sintered zinc-aluminum coating and the study methods of coating failure process are introduced.
热烧结锌铝涂层技术主要应用于紧固件的防腐,自从问世以来就得到了迅速的发展。
Anticorrosion performance of sintered zinc-aluminum coating (dacromet) was studied and compared with zinc electroplate and olive passivated zinc electroplate by means of electrochemical test,whole-dip test,half-dip test,salt-spray test and moisture-heat test.
本文采用电化学测试、全浸试验、半浸试验、盐雾试验和湿热试验研究了烧结式锌铝涂层的耐蚀性能,并与电镀锌和电镀锌军绿钝化层进行对比。
The effect of chromic trioxide content in solutions on the properties of sintered zinc rich coatings was studied by employing zinc flakes and aluminum flakes as materials.
以片状锌粉和铝粉为原材料 ,研究了涂料中铬酐含量对烧结式富锌涂层性能的影响。
Studies on the Deterioration Process of Sintered Zinc-aluminum Coating and Composite Coating
热烧结锌铝涂层及其复合涂层失效过程的研究
EFFECT OF ORGANIC TOP COATING ON ANTICORROSION PERFORMANCE OF SINTERED Zn-Al COATING
有机覆膜对热烧结锌铝涂层耐腐蚀性能的影响
Bonding Mechanism of Thermal Sprayed Aluminum Coating on Glass
热喷涂铝涂层与玻璃结合机理的研究
Corrosion and thermal shock behavior of Al_2O_3 ceramic coating in molten zinc
氧化铝涂层在熔融锌液中的腐蚀及热震行为
EFFECT OF THERMAL SPRAY PROCESS ON BONDING STRENGTH OF ALUMINUM COATING ON GLASS SURFACE
热喷涂工艺对玻璃表面铝涂层结合强度的影响
Quality Control and Producting Process of Non-Spangle Galanize
热浸镀铝锌合金板的镀层结构及其性能
Abstract: In this paper, the workmanship of reactive sintering of thermal spray coating, microstructure and bonding property are introduced.
文摘:介绍了热喷涂层的中温反应烧结工艺，及其组织结构的特点和涂层结合性能。
In this paper, the workmanship of reactive sintering of thermal spray coating, microstructure and bonding property are introduced.
介绍了热喷涂层的中温反应烧结工艺，及其组织结构的特点和涂层结合性能。
Research of Salt-fog Resistance Comparison Between Zinc-aluminum Alloy Coating and Organic Coating
锌铝合金涂层与有机涂层的耐盐雾腐蚀性能对比研究
Study for Preparation, Performance and Mechanism of Non-chrome Zinc-Aluminum Coating;
无铬水性锌铝涂层制备、性能及耐蚀机理的研究
Selection of complex coating and application technology test for work pieces of hot dip galvanized steel
热镀锌钢工件复合涂层的选择与涂装工艺试验
Influence of CNT on Densification of Sm_2Zr_2O_7 Ceramics for Thermal Barrier Coatings by Pressureless Sintering
碳纳米管对Sm_2Zr_2O_7热障涂层陶瓷无压烧结致密化的影响
The Research on the Electro-arc Spray Technique Al Zn on the Magnesium Alloy and the Property of the Coat;
镁合金表面电弧喷涂铝锌工艺及涂层性能的研究
A LONG-TERM EFFECT ANTICORROSION SYSTEM FOR MARINE STEEL CONSTRUCTIONS-SPRAY ZN-AL PSEUDO-ALLOY SYSTEM
海洋钢结构喷涂锌铝伪合金长效防腐蚀体系
Change of the microstructure and phase composition of plasma-sprayed nanostructured zirconia thermal barrier coatings after high temperature calcination
等离子体喷涂纳米结构氧化锆热障涂层高温煅烧后的组织结构和相组成变化
Analysis on Microstructure and Phase Structure of Al_2O_3 Ceramic Coating
氧化铝陶瓷涂层的组织与相结构分析
Study on the Bonding Performance of Plasma Sprayed Ceramic Coatings on Aluminum Alloys Substrate;
铝合金基体等离子喷涂陶瓷涂层结合性能研究
ICP-AES Determination of Aluminum,Zinc,Silicon and Iron in Plating Layer of Colored Al-Zn-Galvanized Steel Sheet
电感耦合等离子体原子发射光谱法测定镀铝锌彩涂板镀层中铝、锌、硅和铁