Numerical simulation of slit type cracking test for 9%Ni steel
9%Ni钢斜Y形坡口裂纹试验的数值模拟
Numerical simulation of slit type cracking test for 9%Ni steel
9%Ni钢斜Y形坡口裂纹试验的数值模拟
The Mechanical Behavior of Notch/crack Specimens of NiTi Shape Memory Alloy at Different Load Modes;
不同加载方式下NiTi形状记忆合金缺口/裂纹试样力学行为的研究
Experimental Study and Modeling of Fatigue Crack Growth Profile and Cracking Path for 16MnR Steel
16MnR钢疲劳裂纹扩展形貌和扩展路径的试验研究与数值模拟
The Experimental Research on Several Points in Unified Fracture Theory of Ductile Material;
金属材料裂纹体与无裂纹体统一断裂理论若干问题的试验研究
MODEL TEST STUDY OF CRACK IDENTIFICATION ON STEEL TRUSS BRIDGE
钢桁架桥梁裂纹识别的模型试验研究
Experimental study and numerical simulation on propagation characteristics of wing type cracks under compression
翼型裂纹扩展特性的试验和数值分析
Mechanism of Crack Formation During Continuous Casting of Peritectic Steel Slabs
包晶钢铸坯裂纹形成机理的实验研究
Standard test method for surface-crack fracture toughness Kle of metallic plates
GB/T7732-1987金属板材表面裂纹断裂韧度Kle试验方法
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
Hydraulic Fracture Test and Crack Propagation Simulation by Element-Free Method;
岩体水力劈裂试验及裂纹扩展的无单元法计算
No stress measurements or crack surface samples were available for examination, only the surface crack configuration.
没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。
Design of Specimen Crack Image Recognition System on Temperature-Stress Test Machine;
温度—应力试验机试件裂纹图像识别系统设计
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
Often lack of fusion adjacent to the girder web in the transverse groove welds led to the cracking.
在靠近主梁腹板的横向坡口焊缝处常常出现未熔透而导致裂纹。
Examine block for cracks or fractures.
测试泵体裂纹或破裂。
The fact is fully testified by inspection of cracks revealed in the dissecting tests of three pieces of mold-lump scrapped by ultrasonic flaw detection.
对超声探伤报废的三块模块进行解剖试验，表露出的裂纹形貌完全说明了这点。
Experimental results indicate that, in the case of single peak stretching overload,intense overload retartation effect (OLRE)exists in short fatigue crack growth and the short fatigue crack is moro sensitive to the OLRE.
试验表明，在单峰拉伸过载情形下，短裂纹扩展存在比较强烈的过载迟滞效应；
Stress Analysis for the Problem of a Circular Hole with Three Unequal Straight Edge-cracks
带三条不对称裂纹的圆形孔口问题的应力分析