slave cylinder piston return spring
工作缸活塞回位弹簧
A spring holds the other ends in contact with the piston of a hydraulic cylinder.
另一端由一个弹簧托住，与液压缸的活塞相接。
slotted spring-finger plunger
带有弹簧销的槽式活塞
ring with coil-spring expander
螺旋弹簧胀圈活塞环
It is defined as the volume of the combustion chamber with the piston farthest out pided by the volume with the piston in the full-compression position (see piston and cylinder).
它的定义是汽缸的最大工作容积(活塞离缸盖最远时)与活塞在充分压缩位置时的汽缸工作容积之比
spring and piston ring elasticity tester
弹簧及活塞环弹性检查器
double-acting single piston rod oil cylinder
双作用单活塞杆式油缸
double-acting double piston rod oil cylinder
双作用双活塞杆式油缸
working stroke of spring buffer
弹簧缓冲器工作行程
The Influence of the Contour of the Piston on Rolling Lobe Air Spring Nonlinear Characteristic;
空气弹簧活塞形状对悬架特性的影响
Compressing the spring rod, the linkage connected mechanically to the rod of the single-acting cylinder turns the fuel regulating shaft to the stop position.
压缩弹簧杆，联动装置机械连接到单作用汽缸的杆上转动燃油调节杆到停止位置。
The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of the valve gear being worked by the push-rods.
气缸盖携带阀门，气门弹簧和在摇臂杆上的摇臂，这部分的气门传动机构通过推杆工作。
Confirming Heat Treatment Process for the Spring of Piston for B_3 Type of Air Gun;
B_3型气枪活塞簧热处理工艺的确定
Research on Uniform Motion of Piston in Double Cylinder Single Acting Piston Pump
双缸单作用活塞泵中活塞匀速运动的探讨
Research into Principle and Economical Efficiency of Single Cylinder Mechanical-Hydraulic-Confined-Piston Engine
单缸机械-液压约束活塞发动机工作原理与经济性
Study on the connections between the press plunger and moving beam of large-scale stamp forging hydrostatic press
巨型压机主工作缸柱塞与活动横梁连接方式的研究
Loss of air pressure, the stored energy in the springs forces the pistons inwards, the pinion turns clockwise while air is being exhausted from Port A.
失气时，由于弹簧的作用使两活塞向中心移动，输出轴顺时针方向转动，空气由A口排出。
Use as a ball or spring plunger. Adjustable ball extension.
用作球形或弹簧柱塞。球形外延可以调整。