Calculation and prediction of critical elastic modulus of short fiber-reinforced metal matrix composites;
短纤维增强金属基复合材料弹性模量临界值计算预测
Research and development on the fabrication process of metal matrix composites;
金属基复合材料制备工艺的研究进展
Influence of SiC_P content and inhibitor on the corrosion behavior of SiC_P/Al metal matrix composites;
SiC_P含量及缓蚀剂对SiC_P/Al金属基复合材料腐蚀行为的影响
Progress in Hybrid Reinforced Cast Metal Matrix Composite;
铸造混杂增强金属基复合材料研究进展
Fabrication Processes and Control of Interfacial Reaction of Particulate Reinforced Metal Matrix Composites;
颗粒增强金属基复合材料的制备技术和界面反应与控制
Carbon nanotube reinforced metal matrix composites fabricated by in-situ chemical vapor deposition
原位化学气相沉积法制备碳纳米管增强金属基复合材料
Application of Ultrasonic in Metallurgy and Preparation of Metal Matrix Composites ( MMCs);
超声波在冶金及金属基复合材料制备过程中的应用
The feature of MMCs and its prospects of application in engineering;
金属基复合材料的特性及其技术在工程中的应用前景
Characteristics of Interface and Mechanical Properties of MMCs;
金属基复合材料界面特征与力学性能
By explosive powder compaction technics,the WC/Al_2O_3/Cu particle reinforced metal-matrix composites produced are studied,and the effects of process parameters on density of compacts are analyzed.
研究了复合材料的微观组织和致密度、韧性和硬度等性能,爆炸粉末烧结法可以成功制出WC/Al2O3/Cu多种颗粒增强金属基复合材料。
The influence of particle size on the dynamic behavior of particle-reinforced metal-matrix composites was investigated through the finite element method under different strain rates.
利用有限元模型分析了颗粒增强型金属基复合材料(PMMCs)Al/SiC的颗粒尺寸对复合材料在不同应变率下的动态特性的影响。
Study on technology of metal-matrix composites reinforced by particulate,fabricating preform by utilizing pore-forming materials.
对颗粒增强金属基复合材料(PRMMCS)的预制件制备工艺进行了研究,以添加多种造孔剂工艺制备预制件,通过性能测试分析了各种造孔剂对预制件性能的影响,综合比较了各组造孔剂的制备性能,结果表明:以活性炭和甘蔗渣组合作为造孔剂制备的预制件孔隙状况较好、综合性能较优。
A new incremental method is proposed to predict the cyclic behavior of metal-matrix composites.
本文以细观力学的平均场理论为基础,利用增量方法分析了金属基复合材料的疲劳性能,在每个增量过程把基体看作各向异性弹性材料来处理。
A novel technique of preparing fiberreinforced metallic matrix composites by electrochemical method was proposed.
提出了利用电化学方法在室温下制备纤维增强金属基复合材料的新技术。
State Key Laboratory of Metal Matrix Composite Materials
金属基复合材料国家重点实验室
Study on Diffusion Bonding Process of Metal Matrix Composites;
金属基复合材料的扩散焊接工艺研究
Study of the Interfacial Thermal Conductivity of Metal Matrix Composites;
金属基复合材料界面热传导性的研究
The Application of Metal-Base Composites in Automobile Industry;
金属基复合材料在汽车工业上的应用
Laser Cladding and Numerical Simulation for Aluminium Alloys;
铝合金激光熔覆金属基复合材料及数值模拟
THE CHIP FORMATION MECHANISM OF HARD PARTICLE REINFORCED METAL MATRIX COMPOSITES
硬脆颗粒增强金属基复合材料的切屑形成机理
Study on Fabrication of Metal Matrix Composites Reinforced with High of Si Particle;
硅颗粒增强金属基复合材料制备工艺的探讨
Development of Interfacial Residual Stresses in Metal-matrix Composites
金属基复合材料界面残余应力的研究进展
Test Research on Antiwear Behaviors and Impact Resistance of Metal Matrix Compound Materials
金属基复合材料减磨抗冲击性能试验研究
Study Situation of Fabricated Metal Matrix Composites by Friction Stir Processing
搅拌摩擦加工制备金属基复合材料的研究现状
Study of Ni/Mn/BaTiO_3 PTC Composites;
金属Ni/Mn/BaTiO_3基复合PTC材料的研究
Experimental Study on Composite Heat Storage Material with Metal and Molten;
金属基相变复合蓄热材料的实验研究
The Study on the Properties of Titanium Substrate Metal Oxide Composite
钛基金属氧化物复合材料性能的研究
ceramic-metal composite
陶瓷与金属复合材料
HOT PRESSING JOINING OF CARBON/CARBON COMPOSITES TO METAL
C/C复合材料与金属材料的热压连接
Research on Aluminum Matrix Composites Reinforced with Intermetallics;
金属间化合物强化铝基复合材料的研究
Study on Magnesium-based Metal and Molecular Sieve Nanocomposite Hydrogen Storage Materials;
镁基金属与分子筛复合纳米储氢材料的研究
Study on the Technology of Nano-ceramic Metallic Matrix Gradient Material;
纳米陶瓷—金属基复合梯度材料制备工艺研究