Accelerating process of a sample engineering vehicle which is from 0 to 100km/h is bulit,its hydraulic element′s displacement control curve and accelerating performance curve are plotted by Matlab.
以某工程车辆为样机,绘制了车辆0~100 km/h加速的液压元件排量控制曲线及加速特性曲线。
The principle and scheme of realization for the pump based on displacement control is proposed,and relevant experiment research and analysis are also carried through.
以径向柱塞泵为研究对象,分析了数字化控制变量径向柱塞泵的数字化控制实现途径,对总体方案进行了详细的分析,提出并讨论了基于位移力矩反馈式排量控制的实现原理和方案,并设计了样机,进行了实验研究和分析,对数字控制变量泵的工程化提出了较好的解决方案,具有较好的工程应用价值。
exhaust manifold heat control valve
排气歧管热量控制阀
This device, called the manifold heat-control valve, is built into the exhaust and intake manifold.
这种装置称为“歧管热控制阀”，它拼装在排气与进气歧管中。
Remove exhaust manifold heat shiel
拆下排气歧管隔热罩。
exhaust by-pass valve control wire switch
排气旁通阀控制线转环
Disconnect the exhaust pipe at the exhaust manifol
断开排气歧管的排气管。
exhaust pressure modulated EGR valve
排气压力控制型废气再循环阀
The basic exhaust system consists of an engine exhaust manifold, exhaust pipe, exhaust heat shield(s), muffler and exhaust tailpipe
基本排气系统包括一个引擎排气歧管、排气管道、排气隔热罩、消音器和排气尾管
Check for signs of leakage or cracked surfaces at both ends of tube, exhaust manifold and EGR valve.
检查两个管的末端，排气歧管和EGR阀是否有泄露或表面有裂痕。
The canister vapor-vent value is operated by vacuum.
活性炭罐蒸气排泄阀是由真空控制的。
The gases pass into the exhaust manifold.
这些废气进入排气歧管。
Couple CFD-FE-Analysis for a Gasoline Engine Exhaust Manifold of Thermal Load
CFD-FE耦合计算分析某汽油机排气歧管热负荷
Disconnect exhaust pipe at manifol
在歧管处断开排气管。
2 Mechanical volume control damper shall be available at each exhaust point to enable easy balancing.
每个排气点上由机械控制阀门来保持气压平衡。
discharging valve
排出阀排气阀排水阀
Install throttle body to intake manifol
安装节气阀体至进气歧管。
Disconnect the exhaust pipe at the engine exhaust manifol
拆开引擎排气歧管处的排气管。
Connect the exhaust pipe to the hanger and to the engine exhaust manifol
连接排气管到悬挂物、到引擎排气歧管。
The Study on Controlling and Managing Total Quantity of Air Fluoride Emission in Baotou
包头市大气氟化物排放总量控制管理研究