In this paper,microstructures of triangle cam made of steel Cr12MoV under various conditions were studied.
通过对不同加工状态下Ｃｒ１２ＭｏＶ钢三角凸轮样品显微组织的观察分析，提出较合理的加工工艺和方法。
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."
当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
allowable pressure angle of cam mechanism
凸轮机构的许用压力角
overhead cam shaft
上凸轮轴上部凸轮轴
DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]
按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径
Study on the General Measuring Technique for Angle and Parameter of Cam;
角度及凸轮参数综合测试技术的研究
camshaft(journal )turning lathe
凸轮轴（轴颈）车床
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
Derivation of pressure angle formula for disk cam mechanism with convex arc bottomed follower
凸圆弧底从动件盘形凸轮机构压力角公式的推导
cam shaft drive
凸轮轴传动凸轮轴传动装置
STUDY ON PROFILE MODIFICATION OF ROLLER GEAR CAM MECHANISMS
弧面分度凸轮机构凸轮廓线修形研究
arm type cam roller mechanism
摇臂式凸轮滚轮机构
Design and Analysis of Solution to Cam Initial Revolving Angle Test
凸轮测量起点转角求解方法的设计与分析
Discussion on the Methods of Calculating the Pressure Angle of a Cam with Oscillating Follower Offset from the Axis
论偏置摆动从动件凸轮压力角的计算方法
New Method of Founding Profile Equations and Pressure Angle Formula to the Cylindrical Cam Mechanism with Slide Roller-Follower
建立圆柱凸轮廓面方程及压力角公式的新方法
Measurement of Rotation Angle and Intelligent Electronic Controller for Cam Operated Switches
旋转角的检测及智能化电子凸轮开关控制器