workpiece

1. The workpiece is already on the lathe.: 工件已经上了车床。

2. Before cutting, he set a workpiece out.: 车削前他先在工件上画了线。

3. This workpiece is no more elastic than that one.: 这个工件不比那个工件更有弹性。

4. This workpiece is not more elastic thant that one.: 这个工件不比那个工件更有弹性。

5. Solar cells supply the energy for this workpiece detector.: 太阳能电池为工件探测器提供能源。

6. To join the workpiece should be oil removal of nitrate.: 向硝盐内加入工件应去除油污。

7. For rotation of the workpiece around the horizontal axis.: 对于周围的水平轴转动工件。

8. Danny: By moving a cutting tool against a rotating workpiece.: 丹尼：通过将切割刀具移近旋转的工件。

9. The workpiece and fixture should be fully dry before loading.: 工件与夹具装炉前应充分烘干。

10. Prohibit taking furnace lining as the guide for heating workpiece.: 禁止以炉衬作为加热工件的导轨。

11. Conception and classification of weld workpiece feature were introduced.: 提出了焊接工件特征的概念和分类。

12. For complex workpiece, the general working plane is first to be machined.: 对复杂工件，一般先呈工平面再加工孔。

13. Workpiece burn is an important factor to damage machined surface quality.: 磨削烧伤是影响已加工表面质量的重要因素。

14. Upper ejector rod was added in the die structure for ease of workpiece separation.: 在模具结构中增加了上项杆(上打料棒)，便于工件脱离。

15. Large scale workpiece in several big range measuring parts of the rapid inspection.: 大型工件大范围内多处测量部位的快速检验。

16. During machining, ultrasonic vibration of workpiece can improve the machining process.: 在加工过程中，通过超声波振动，工件加工工艺得到改善。

17. A great variety of workpiece may be produced without resorting to a machining operation.: 很多种类的工件可能不用选择机加工操作就可以做出来。

18. Because no tool pressures are involved, the process is ideal for machining delicate workpiece.: 由于刀具不施压力，因而是切削易碎材料的理想工艺。

19. Induction heating system elements, including induction coil, an AC power source and the workpiece.: 感应加热系统的基本组成包括感应线圈、交流电源和工件。

20. We have workpiece materials from a very soft, buttery consistency to very hard and shear resistant.: 我们的工件原材料从非常软，像黄油一样黏稠的到非常硬的有抗剪力都有。

21. Then the pipeline moves the heated workpiece to a complex of rolling that consists of several stages.: 然后输送管道把这些加热过的管坯传到包括几个阶段的复杂的生产线上。

22. Facing can be carried out either from the periphery inward or from the center of the workpiece outward.: 端面车削既可以从外表面向内切削也可以从工件中心往外切削。

23. The removal of material from a workpiece is termed generation of form by machining , or simply machining.: 从工件上切除材料被称为机加工成型阶段，或者简称为加工。

24. The metal cutting tool separates chips from the workpiece in order to cut the part to the desired shape and size .: 为了要把加工的零件切削成所要求的形状与尺寸，金属切削刀具就要从工件上切除切屑。

25. The workpiece has an accurately machined bore, and is located from the bore and the end face, from a cylindrical post.: 此工件有一精确机加工的大孔，因此通过一圆柱体采用该孔和工件端面定位。

26. In not curing powder coating surface of workpiece solid pollutants is invisible, the film became very obvious once curing.: 在未固化的粉末涂装工件表面固体污染物是看不见的，涂膜一旦固化则变得十分明显。

27. The primary method of imparting form and dimension to a workpiece is the removal of material by the use of edged cutting tools.: 对一个工件最基本的说明其形式和尺寸的方法就是告知通过刀刃对材料的除去量。

28. The primary method of imparting form and dimension to a workpiece is the removal of material by the use of edged cutting tools.: 对一个工件最基本的说明其形式和尺寸的方法就是告知通过刀刃对材料的除去量。

热门分类

英语例句推荐