trunnion

1. The unique part of the mounting is the trunnion.: 独特的部分是耳轴安装。

2. The full series are structure of trunnion mounted ball.: 全系列采用固定球结构。

3. Trunnion Design: Upper and lower supports retain ball under pressure.: 耳轴设计：在压力下上下支持阀球。

4. Axis press allowable bending stress calculation method trunnion check.: 轴按许用弯曲应力计算法校核轴径。

5. Trunnion bascule bridges are doubtless one of the renowned bridge types in Chicago.: 耳轴开合桥是芝加哥最出名的桥的种类之一。

6. The trunnion journal (22) is made by cutting hardened steel with using no cutting fluid.: 该耳轴轴颈（22）通过淬火钢的干式切削形成。

7. Has the ability to purge through the trunnion to keep both the trunnion and the cavity clean.: 有能力冲洗整个轴颈，保持轴颈和空穴清洁。

8. In general, WILLIAMSONs trunnion ball valve features the front ball sealing design structure.: 威廉姆森固定球阀一般采用球前阀座密封结构。

9. The QTCV-T1 trunnion-mounted rotary control valve designed for general control valve service.: T1 型装有底轴的旋转控制器是用来为普通控制阀服务的。

10. A method of determining the sight line offset and its causes with - out adjusting the trunnion is suggested.: 提出了一个不必调整炮耳轴水平而测定瞄准线偏移及其原因的方法。

11. In this paper, the construction, principle and reasonableness of J seal of turbine guide vane trunnion are presented.: 本文阐述了水轮机导叶轴颈J型密封的结构、工作原理及其合理性。

12. The article briefly introduces the centre drive technology with transducer lower trunnion for Ljungstrom air preheater.: 简单介绍了空气预热器下轴中心变频驱动技术。

13. The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.: 耳轴组件的支承是每根臂末端的空气轴承，轴承上的闸瓦起定位作用。

14. Steel converter is the main equipment in steel-making, and the drive mechanism, trunnion bearing, is the key component of steel converter.: 炼钢转炉是炼钢生产的重点设备，而转炉的传动机构——耳轴轴承又是炼钢转炉的关键部件。

15. The load and air cylinder can swing round the pin in a plan, if the stroke is long, adopt the intermediate fixed or movable trunnion type.: 负载和气缸可绕铰轴在一个平面内摆动，气缸长行程时，建议采用中间铰轴式。

16. A large trunnion or trunnion support design ensures central position of ball under the highest working pressure. This permits ease of operation.: 大枢轴或枢轴板设计，确保球体在高压下具有正确的中心位置，保证阀门良好的操作性能。

17. In this paper, it is founded the error existed for a long time, which is caused by using the quadrant improperly to refer the trunnion-tilt sensor.: 论证了长期以来存在的用象限仪标定炮耳轴倾斜传感器的方法误差。

18. Heavy Duty trunnion - The ball trunnions are designed for demanding applications requiring long service life, with a reduction in maintenance time and costs.: 重型耳轴，球耳轴是苛刻的要求，使用寿命长的应用而设计，以期在维护时间和成本的降低。

19. The fixture supports two trunnion shafts attached to the support structure of the receiver Lifting lugs would be located on the top end of the support structure.: 这种夹具可支承固定在这种太阳能吸收器的支承结构上的两根耳轴，吊耳设置在支承结构的顶端。

20. The results show that the maximal stress appears in the fillet which connects the feeding cover and the trunnion, and the minimal stress appears in the middle of the cylinder body.: 计算结果表明：左端盖与中空轴的过渡处应力最大，筒体中部应力最小。

21. Reduced trunnion drag and energy waste because the trunnions on the VR taper bucket are positioned on the rear taper effectively reducing the area of the trunnion exposed directly to soil flow.: 由于VR锥形铲斗的耳轴是在铲斗的锥形后部，有效地缩小了耳轴直接接触货流的面积从而减少耳轴牵拉和能量消耗。

22. The main reasons resulting in the high oil temperature is that the oil starvation and the gap geometry shape between the bush and the trunnion is not suitable to the dynamic lubricant conditions.: 根据分析结果，找到油温升高的主要原因是由于带油不畅和供油量不足引起，提出刮瓦和改造低压供油装置的措施。

23. Roller cassette (3) that fits over the trunnion journal (22) for rotation has a roller (31), inner ring (32), and multiple needles (33) interposed between the roller (31) and the inner ring (32).: 围绕耳轴轴颈(22)旋转自如地嵌合的滚柱盒(3)具有滚柱(31)、内圈(32)、夹持在滚柱(31)和内圈(32)之间的多个针状滚子(33)。

24. This Paper presents an analytical method on the investigation of the motion characteristics of spatial mechanism, with it applied to the Ball-and-Trunnion Type of Joint, i. e, the Multiple-Pode Joint.: 本文提出了一种分析空间机构传动特性的方法，并应用于球叉式联轴器运动分析。

25. This Paper presents an analytical method on the investigation of the motion characteristics of spatial mechanism, with it applied to the Ball-and-Trunnion Type of Joint, i. e, the Multiple-Pode Joint.: 本文提出了一种分析空间机构传动特性的方法，并应用于球叉式联轴器运动分析。

热门分类

英语例句推荐