cruciform

1. The chosen vehicles are a blunt bi cone with cruciform flaps and a variable bent axis vehicle.
所研究的气动外形为带控制舵飞行器和可变弯体飞行器。

youdao

2. The building, designed in a cruciform plan, is defined by three axes: central, longitudinal and vertical.
建筑被设计成十字形,由中轴、纵轴和垂直轴三轴确定。

youdao

3. The cruciform control rod controlling is the main method to control reactivity in the nuclear heating reactor (NHR).
核供热反应堆的过剩反应性主要靠十字形控制棒来控制。

youdao

4. Cruciform - a tree shape that requires its own material so that it can prioritize with the terrain and the surrounding objects.
十字——一棵树的模型需要自身材质因此它能用地形和环境物体区分优先次序。

youdao

5. The cruciform wooden joints in the bases of the columns are anchored to the foundation by lug screws and cantilevered from the floor.
在基础部分的木制十字接头通过螺丝钉铆固在地基上。

youdao

6. The utility model relates to a screwdriver which has the functions of a screwdriver with a flat cutter head and a cruciform screwdriver.
本实用新型涉及到一种螺丝刀,集扁平刀头螺丝刀和十字花螺丝刀于一体。

youdao

7. Lamellar tearing is a kind of brittle fracture in thick plate of steel structures, which usually occurs in cruciform, tee and corner joints.
层状撕裂是钢结构厚板中的一种脆性断裂形式,通常发生在十字形接头、T形接头和角接接头中。

youdao

8. On the basis of the test of full-scale cruciform specimens under low-reversed cyclic load, its load-bearing capacity under shear force was studied.
在已完成的足尺十字形节点试件拟静力实验基础上,对节点的受剪承载力性能加以研究。

youdao

9. Nordic firm AART has won a competition to extend the Viking Age Museum building in Oslo, with plans to add a new curving wing to the cruciform plan.
北欧建筑事务所aart在奥斯陆维京时代博物馆的扩建竞赛中获得胜利。他们计划为原有的十字平面增加一个全新的曲线型附楼。

youdao

10. The hollow piers and cruciform piers of the Xiangzikou Bridge on Shiyan-Manchuanguan Expressway were constructed by means of the turnover formwork technique.
十堰至漫川关高速公路巷子口大桥空心墩和十字墩采用翻模技术施工。

youdao

11. This paper summarizes the tests under cyclic reverse loading of four cruciform R. C. frame beam-column joints which are strengthened by enlarging column sections.
本文概述了四个十字形钢筋混凝土框架节点试件采用柱加大截面法加固后,在低周反复荷载作用下的试验。

youdao

12. There is no need to weld the joint thoroughly for the cruciform joint. But if the dimension which is not welded is too large. that will make fatigue strength reduce.
厚板焊接结构的角焊缝,多数情况下没必要完全焊透,但是,如果未焊透部分尺寸过大,就会使焊接接头的疲劳强度大幅度降低。

youdao

13. In this paper aerodynamic characteristics of maneuvering reentry vehicle of cruciform configuration and bifurcate configuration are compared by means of the wind tunnel test results.
利用典型状态的风洞试验结果对十字布局与叉字布局再入机动飞行器的气动特性进行了分析与比较。

youdao

14. In this paper aerodynamic characteristics of maneuvering reentry vehicle of cruciform configuration and bifurcate configuration are compared by means of the wind tunnel test results.
利用典型状态的风洞试验结果对十字布局与叉字布局再入机动飞行器的气动特性进行了分析与比较。

youdao