On shear strength testing method of explosion cladding joint;
爆炸复合接头剪切强度测试方法研究
Effect of magnetic field on shear strength of adhesively bonded single lap joint;
外加磁场对粘接接头剪切强度的影响
Interfacial reaction and shear strength of Sn-Zn-Cu/Cu joints;
Sn-Zn-Cu/Cu界面反应及剪切强度
The adjusted shearing strength formula of rough rock joint;
粗糙岩石节理剪切强度的修正公式
Effect of rosin contents of lead-free solder paste on the shearing strength of the weld spot;
无铅焊膏中松香含量对焊点剪切强度的影响
Study of the shearing strengths of marine sediment in the China’s mining region;
海底沉积物剪切强度的试验研究
Test results of the fracture strength and the notch strength of gray cast iron under tension and bending loading are summarized in the present paper.
总结了国产灰铸铁的抗拉强度与抗拉切口强度、抗弯强度与抗弯切口强度的试验研究结果。
For metal notch strength estimation, either Neuber method based on Neuber's rule or energy method based on Moski and Glinka's equivalent energy density method may be used.
本文以弹塑性幂硬化材料为研究对象，将两种方法得到的结果与实验结果进行了比较，发现Neuber法总是低估切口强度，而大多数情况下，能量法却高估切口强度，并且总的来说，能量法的精度高于Neuber法的精度；能量法的可靠性高于Neuber法的可靠性。
Further analysis on the notch strength of alumina ceramics was carried out.
本文对Al2O3陶瓷的强度实验结果进行了进一步分析，分析结果表明：陶瓷的弯曲切口强度和弯曲断裂强度的实验结果同时服从正态分布、对数正态分布和两参数Weibull分布。
Effect of different surface conditioning on shear bond strength of different types of luting cements to ceramics;
瓷表面不同处理方法及粘结剂对全瓷剪切强度的影响
Study of shear bond strength of light-cured and resin-reinforced glass ionomer cement immediately after bonding;
光固化树脂加强型玻璃离子水门汀即刻剪切强度的测定
Comparative study on the shear bond strength of light-cured glass ionomer cement between etching and nonetching;
酸蚀对树脂加强型玻璃离子抗剪切强度的影响
Evaluate of shear bonding strength of a self-etching adhesive to dentine in different conditions;
牙本质表面不同状态对自酸蚀体系剪切强度影响的实验研究
Objective:The aim of the study was to investigate the effects of different etching time on shear bonding strength to guide its clinical use.
目的:研究不同酸蚀时间和不同施力方向对正畸托槽与牙面间剪切强度的影响。
To investigate the effects of different surface conditioning methods on the shear bonding strength of glass-infiltrated ceramic to dentine, 24 glass-infiltrated ceramic testing-pieces were pided into four groups randomly.
用Super Bond与牙本质粘接 ,测其剪切强度。
testing methods for shear strength of plastics by punch tool
塑料剪切强度试验方法
uniform strain shearing strengh tester
等应变剪切强度测试仪
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
Study on Residual Shear Strength of Reinforced Concrete Bridge Columns under Strong Seismic Ground Movement;
强震动下钢筋混凝土桥墩的残余剪切强度研究
Ebonite--Method of test for shearing strength
GB/T1700-1982硬质橡胶抗剪切强度试验方法
Thermal sprayed metallic coatings-Determination of shear strength
GB/T13222-1991金属热喷涂层剪切强度的测定
Testing methods for shear strength of plastics by punch too
GB/T15598-1995塑料剪切强度试验方法穿孔法
testing methods for shear strength of adhesive bonds by tensile loading
用拉伸负荷测定粘合剂剪切强度
testing methods for strength properties of adhesives in shear by compression loading
胶粘剂压缩剪切强度试验方法
The shear strenth is equal to the cohesion of substance.
剪切强度等于物质的内聚力。
Test Attempt to Shear Strength of in Terface for Embedded Optical Fiber Sensors
埋入式光纤传感器界面剪切强度实验
Effect of reflow soldering on IMC and shear strength of SnAgCu solder joint
回流焊对SnAgCu焊点IMC及剪切强度的影响
Effects of particle shape on shear strength of discrete media
颗粒形态对离散介质剪切强度的影响
Shear Strength of R/C Bridge Cantilever Slabs
钢筋混凝土桥悬臂板的剪切强度分析
testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method
纤维增强塑料的短梁层间切变强度法
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
An Experimental Study of the Adiabatic Shear Behavior in Orthogonal Cutting of High Strength Steel
正交切削高强度钢绝热剪切行为的实验研究