This article tells of the necessarity of developing new ingot mould and the design of changing the bottom of ingot mould.
阐述了开发新型锭模的必要性和换底锭模的创新设计思路,扼要介绍了换底锭模的生产方法及其使用效果。
The characteristics of bottom change-over ingot mould are introduced as well as the tests and the results comparing with former ingot mould.
介绍了换底锭模的特点及其与旧式锭模进行现场对比试验情况和结果,从设计、综合力学性能和冷却能力等方面对换底锭模寿命长、合金质量好的原因进行了定性和定量分析。
The working conditions and properties requirements of moulds for aluminum ingot production,as well as the production technology of vermicular iron-made ingot mould was described.
介绍了铝锭模的工作条件、性能要求和蠕墨铸铁铝锭模的生产方法,比较了蠕黑铸铁、灰铸铁和球墨铸铁的静载力学性能、高温力学性能和耐热疲劳性能,认为蠕墨铸铁材料用作铝锭模材料较为合适。
This paper studies the relationship between the rheological and technological properties of the coating for ferroalloy ingot mold.
研究了水基锭模耐火涂料的流变学性质与其工艺性能之间的关系。
Failure modes analysis of ingot mould under the thermal cycling phase condition;
钢锭模在热循环状态下的失效形式分析
Save a Batch of Ingot Moulds of Gray Iron by Heat Treatment Method;
采用热处理方法挽救一批灰铁钢锭模
A new kind of coating of ingot mould was made by using graphite,bentonite and blastfurnace slags as raw materials and solution of water glass sa bonding agent.
以石墨、膨润土和高炉渣为原料，以水玻璃溶液为结合剂，制成一种新型钢锭模涂料。
The limitation of the conventional design of the heavy duty ingot mold has been analyzed in this article.
分析了传统设计在大型钢锭模上的局限性,为采用计算机设计大型钢锭模提出新的思路。
The computer numerical simulation technique is used to simulate and analyze the temperature field, the thermal stress and the crack sensitivity coefficient of the ingot mold FZ25t during the solidification period of the ingot.
针对大型灰铸铁扁型钢锭模早期裂纹报废问题，采用计算机模拟计算技术对ＦＺ２５ｔ钢锭模使用过程的温度场、热应力和裂纹敏感系数的变化过程进行了数值计算分析，并优化了结构设计。
6 t steel ingot mould,as a example one,were analysed with thermal photoelastic method and finite element method.
６ｔ钢锭模为例，采用热光弹法与有限无法对钢锭模模口截面进行热应力与变形分析，针对钢锭模截面形状进行优化设计，提出合理的钢锭模截面形状与尺寸，为提高钢锭模的使用寿命提供可靠依据。
mould setting-and-stripping bay
钢锭模准备和脱锭跨
ingot mould of metal for use in metal
金属铸造金属铸锭模
The moulds are made of cast iron.
钢锭模是用铸铁做的。
Stress-strain Analysis of Zinc Ingot Die Based on Numerical Simulation
基于数值模拟的锌锭模应力应变分析
PRINCIPLE OF IMPROVING KILLED STEEL QUALITY BY BLOWING Ar INTO MOLDS
钢锭模内吹氩提高镇静钢质量的原理
Using Numeral Simulation to Optimize Casting Method Design of a Heavy Vermicular Iron Steel Ingot Mold
用数值模拟优化大型蠕铁钢锭模工艺设计
The molten metal may enter the ingot mould in two ways: from the top and from the bottom.
钢液注入钢锭模可采用两种方式:上注和下注。
Surface pinholes caused by gas formed at the mould surface.
因钢锭模表面生成气体而形成的表面针孔。
A mold in which such metal is cast.
金属铸模金属锭在其中被铸的模子
Numerical Simulation of Solidification Structure Formation of TiAl Alloy Ingots;
TiAl合金锭凝固组织形成的数值模拟
Improvement on the de-moulding mechanism for 20 kg aluminium ingot continuously casting machines
20kg铝锭连续铸造机组脱模机构的改进
Analysing of Profile Plate and Cam Mechanism Designing for Drawtwister
牵伸加捻机成形模板与锭子变速凸轮设计分析
Mathematical Model of the Heat Transfer and Optimization of Cap Section Design in Killed-Steel Ingot
镇静钢锭热过程数学模拟及帽口优化设计
Numerical Simulation for Temperature Field of Forging Ingot Solidification Process and Application;
锻造用钢锭凝固过程温度场数值模拟及其应用
Microstructure and Solidification Simulation of Φ480 ZK60 Mg Alloys Cast Ingot;
工业态Φ480ZK60镁合金铸锭组织研究及凝固模拟
Coupled Numerical Simulation of Solidification Transport Behaviours in Electromagnetic Continuous Casting of Steel Ingots;
电磁场下钢锭连铸凝固传输行为耦合数值模拟
Numerical Simulation of the Process of Vertical and Directional Solidification of Large-size Steel Ingot;
大型垂直定向凝固钢锭凝固过程数值模拟
Research on the Thermal Fatigue Property of the Aluminum Ingot Mould Material for Continuous Casting Machine Application
铝锭连铸机用模具材料热疲劳性能的研究