To eliminate possible internal maladjustments,"A pattern readings" are made in sets of four.
为了消除可能存在的内部失调，“A标尺读数”要以四个读数为一组。
"The reading on the gauge, called the gauge pressure, is always the difference Between two pressures."
标尺上的读数,称为计示压力,通常是两个压力数之差。
Based on buoyance and force of gravity principle, the practical and economical test measure of overflowing water has been made.
依据浮力和重力的原理，制作了实用经济的池外测试标尺，提高了读数的精确度。
A standard dimension, quantity, or capacity.
尺度，标准标准的体积、数量或容积
The vertical and horizontal dimensions of a label must be positive numbers.
标签的垂直和水平尺寸必须是正数。
She ruled a line and numbered it off;one inch representing three feet.
她划了一条线,标上数字,每寸代表3尺。
Dimensions, quantity, or capacity as ascertained by comparison with a standard.
度量用标准比较确定的尺寸、数量、容量
Implementation of Dimension of AutoCAD Parameter Drawing;
AutoCAD参数化绘图的尺寸标注的实现
What does the scale, dial, gauge, etc read?
刻度尺、 刻度盘、 量规等显示的读数是多少?
What does the scale, dial , gauge, etc read?
刻度尺、刻度盘、量规等显示的读数是多少?
Their directions can be read to within 5° from a circular scale attached to the strain gauge.
其方向可以在应变计的圆形刻度尺上读出，读数误差约在5°内。
The degree indicated by a measuring instrument.
指示器读数用于测量的器械的读数或指针所标示的读数
A force exerted on the balance changes the length of the spring, and the change can be read on the scale.
当秤受力时，弹簧长度就发生变化，这一变化可在标尺上读出。
Select the number of pisions to display for this graph scale.
选择用于显示该图形标尺的刻度的数目。
The Coordinate Dimensions Calculation and Analysis of Disc Type Component NC Machining
圆盘形零件数控加工的坐标尺寸计算及分析
She rufad a line and numbered it off; one inch representing three feet.
她画了一条线，标上数字，每寸代表3英尺寸。
The NC Processing of Small Brand Based on the Picture;
小尺寸商标牌从图片到数控加工的实现
Infrared target segmentation method with multiscale MRF based on data distribution deduced from KLFCV
基于KLFCV数据分布形式的多尺度MRF红外目标分割