A comprehensive analysis was carried out on low efficiency,high faults,deformation of inclined plate and poor drainage quality of the inclined plate settling pond.
围绕斜板沉淀池效率低,故障率高,斜板变形,出水水质差等问题进行综合分析研究,对斜板池进行全面改造,同时对相应系统工艺进行优化。
This paper introduces the technology of high-efficiency magnetization inclined plate precipitator in Jinan No.
介绍了济南第三炼钢厂高效磁化斜板沉淀器技术,实践表明,采用该工艺及技术,连铸水处理系统运行稳定,处理后悬浮物含量≤20mg/L,油含量≤5mg/L,可实现闭路循环,全部回用,无污水外排,操作管理方便、安全、能耗低,是一套成熟完善、经济合理的工艺技术。
The plastic limit analysis for a simply supported oblique plate is performed by the unified strength theory[6], A unified plastic limit load expression of lower bound is obtained in the paper.
通过用统一强度理论（俞茂宏，１９９１）对简支斜板进行塑性极限分析，得到了斜板的统一极限荷载 下限解析式，从而得到一系列从单剪强度理论（Ｍｏｈｒ－Ｃｏｕｌｏｍｂ，１９００）到双剪强度理论（俞茂宏，１９８５）以及从 单剪屈服准则（Ｔｒｅｓｃａ，１８６４）到双剪屈服准则（俞茂宏，１９６１）的各种斜板的极限荷载下限解。
A new regulating method is proposed which includes the influence of angle of attack, and is used to design an inlet ramp regulating system.
研究了将飞机攻角影响引入进气道斜板调节系统的调节规律，仿真结果表明该调节规律使斜板调节系统具有良好的性能，对深入研究综合飞行／推进控制系统具有重要作用。
Finite difference analysis of skew plates;
用差分法分析斜板的小挠度弯曲问题
Analytic solution on skew plate bending with simply supported under arbitrary concentrated load;
任意集中荷载下简支斜板弯曲问题的解析解
The general analytic solutions for the transerve bending of the anistropic skew plate structure is applied to study the bending of fiberreinforced symmetrically angleply laminated composite skew plate under uniformed load.
计算表明在均布载荷作用下，对于小斜角（β≤４５°）的层合斜板的铺设角为４５°时挠度较小；而大斜角（β＞４５°）的层合斜板的铺设角为０°时刚性较大。