Remove plug from each access hole in brake support plates.
从刹车支撑板中的每个检查孔中拆卸活塞。
Remove the piston and spring from the relief valve housing and thoroughly clean all parts including the diaphragm.
从安全阀外壳上拆卸活塞和弹簧，彻底清洗包括隔膜的所有部件。
Connecting rods and pistons are removed as assembly from the engine.
把连杆和活塞做为整体组件从发动机上拆卸下来。
Remove the cover and diaphragm. The relief valve piston assembly can be lifted straight up and out.
拆卸阀盖和隔膜。安全阀活塞总成可以笔直提出到外面来。
piston ring plier(piston ring tongs)
活塞环钳（活塞环拆装钳）
A special ring tool is required for ring removal. The tool has two small claws that catch under the ends of the ring.
活塞环的拆卸要求使用专用工具进行。这种工具有两个小爪,可以伸到活塞环下端将其卡住
Remove the plug gauge and complete the inverted flare.
拆卸塞规并完成反转扩口。
Remove tool from rack piston.
从齿条活塞上拆下工具。
Stripped Bonds and Stripped Coupons
拆卸债券及拆卸息票
combination body
活顶车(车顶可拆卸),组合车身
Remove the injector sensor wire and the glow plug hot lead .
拆卸喷射器感知器电线和预热塞出口线。
Handbags with detachable straps can double as clutches for the evening.
提带可拆卸的手包也能为你的晚间活动添彩。
During normal field service there is no need to remove the bottom plug spring assembly other than inspection.
在正常的现场维修时，除非检查，否则不需要拆卸底部塞弹簧总成。
To clean strainer, shut off supply, remove bottom plug(4) and clean attached strainer.
要清洗过滤器，则先关闭供应管道，拆卸底部塞()并清洗附属的过滤器。
To clean; remove bottom plug, seat spring, strainer and seat disc.
因此要清洗，拆卸底部塞、阀座弹簧、过滤器和阀座阀瓣。
Remove bypass hose from test cock No. 1, open shutoff valve No. 1.
从测试旋塞1号上拆卸旁路软管，开启1号关闭阀。
To Clean or replace disc or strainer, remove the large hex head bottom plug.
为了清洗或更换阀瓣或过滤器，拆卸底部的大六角头塞。
It can be removed by simply unscrewing with a large pipe wrench.
只需用一把较大的管道扳钳旋下螺纹就可以拆卸底部塞弹簧总成。