Numerical simulation of internal flow field within the volute of vortex pump;
旋流泵无叶腔内部流场数值模拟
Design and performance experiment of sewage and slurry vortex pump;
污水渣浆旋流泵设计及特性试验
The numerical simulation research on distribution of solid particle on solid-liquid vortex pump;
固液旋流泵固体颗粒分布的数值模拟研究
Considering Reynolds Average N-S Equation and standard k-ε turbulence model with SIMPLEC algorithm,numerical simulation for the three-dimensional steady incompressible turbulent flow of the vortex-pump was carried out.
5型旋流泵进行了数值模拟计算,泵内部流动区域选用Pro/E造型,用Gambit软件采用分块非结构六面体网格划分方法对模型进行网格划分及部分边界条件的设定,运用雷诺平均N-S方程和标准k-ε双方程湍流模型结合SIMPLEC算法,来数值模拟旋流泵内部三维不可压湍流场。
The development of vortex-pump in home and abroad are systematic narrated.
针对国内外文献中所分析的结构参数对旋流泵性能的影响,结合实验所得结果对旋流泵的计算模型、计算方法和设计方法等研究现状进行综合分析,提出对旋流泵的设计应在已有的实验数据和数值模拟的基础上对不同浓度、不同粘度、不同粒径颗粒以及在不同比转数情况下对旋流泵进行分型设计,提出应对不同的流动采用不同的设计模型的展望。
Study of guide wall structure influence on performance of rotational flow self-priming pump
旋流自吸泵导壁结构对性能的影响
Body structural optimization of rotational flow self-priming pump based on orthogonal design
基于正交设计法的旋流自吸泵泵体结构优化
Based on large eddy model simulation,3-D unsteady flow field of rotational flow self-priming pump was simulated numerically.
基于大涡模拟法,对旋流自吸泵内部流场进行了三维非定常数值模拟,通过设置监测点,得到了蜗壳壁面、导壁和气液分离室内的水压力脉动情况,并进行了频域分析。
Research on the CAD System and Inner Flow Numerial Simulation of Vortex Pump;
旋流泵的CAD系统及内部流场数值模拟
Three-dimensional Numerical Simulation of Vortex-pump;
旋流泵三维流场数值模拟及性能预测
Salt-Out Two-Phase Flow Theory and Investigation on Internal Flow in a Vortex Pump
盐析两相流理论及旋流泵内部流动的研究
Numerical Simulation and Experimental Study on Liquid-Solid Two-Phase Flow in Vortex Pump;
旋流泵内部液固两相流场的计算及PDPA实验研究
Numerical Analysis of the Influence of Different Flow Parameters on the Performance of Vortex Pumps
旋流泵不同流道参数对性能影响的数值分析
" Test methods for centrifugal, mixed flow, axial and regenerative pumps"
GB/T3216-1989离心泵、混流泵、轴流泵和旋涡泵试验方法
Optimization design of structural parameters of rotational flow self-priming pump body
旋流自吸泵泵体结构参数的优化设计
" Economical operation for industrial centrifugal, mixed flow, axial flow and vortex pump systems"
GB/T13469-1992工业用离心泵、混流泵、轴流泵与旋涡泵系统经济运行
Body structural optimization of rotational flow self-priming pump based on orthogonal design
基于正交设计法的旋流自吸泵泵体结构优化
Numeration Simulation of the Flow Field 3-Dimensional in a Screw Centrifugal Pump;
螺旋离心泵内部流场全三维数值模拟
Experimental Study on Magnetic Fluid Seal of Centrifugal Pump
离心泵旋转轴的磁流体密封实验研究
Fluid flow pattern in rotor cavity of roto-jet pumps
旋转喷射泵转子腔内液体的流动规律
The Design and Flow Simulation of the Roto-Jet Pump s Pick-Up Tube and Rotating Case;
旋喷泵集流管设计及其与转子腔内部流动模拟
Analysis of numerical simulation of flow field and design method of the collecting pipe in the roto-jet pump
旋喷泵集流管的设计方法及内部流场分析
Pressure Fluctuation Characteristics Study of Unsteady Flow Field on Rotational Flow Self-priming Pump
旋流自吸泵非定常流场压力脉动特性研究
Numerical analysis of influence of solid/liquid two-phase flow on flow field in screw centrifugal pump
固液两相流对螺旋离心泵流场影响的数值分析
Flow field simulation analysis of pressurized unit on the downhole helicon-axial multiphase pump
井下螺旋轴流式混抽泵增压单元流场仿真分析
Flow Field Numerical Caculation and Analysis of Conical Spiral Impeller Blood Pump;
锥形螺旋叶轮血泵流场数值计算与分析