Mathematical modeling and optimization on rocker mechanism of automobile;
汽车摇臂机构的数学建模及最优化
Failure Analysis of the Fractured Rocker in Distribution Equipment of Diesel Engine;
柴油机配气机构中摇臂构件的断裂失效分析
Study on Processing Technology of Batch Production of Aluminum Alloy Rocker with Ceramic Insert Block;
铝合金陶瓷镶块摇臂批量生产的工艺技术研究
Virtual prototype of shearer ranging arm and its dynamics analysis;
采煤机摇臂虚拟样机及其动力学分析
Dangerous cross-section of shearer ranging arm is attained through theoretical analysis.
以MG710-WD型采煤机摇臂为研究对象,在两种工况条件下,用ANSYS软件对摇臂危险截面进行有限元分析,得到等效应力分布情况及疲劳寿命,为摇臂的结构优化提供理论参考。
Study on design of machining equipment for rocker arm s deep hole;
摇臂深孔加工设备的设计研究
Application of modern design techniques to aluminum die－ cast rocker arm with a ceramic insert for internal combustion engines;
现代设计技术在铝合金陶瓷镶块摇臂研制中的应用
The effects of technical parameters of laser surface alloying processing on the qualities of the alloyed layer of rocker arm used in motor were investigated with orthogonal test,and the factors and their levels were analyzed.
采用正交试验 ,对激光表面合金化工艺参数进行了优化 ,分析了各工艺参数对气门摇臂合金化层质量的影响。