Digest Analyed the combusible oil electromangnetism total valve of our power plant existed problems, Introduced to the means of solve and have obtioned purposes.
分析了电厂燃油电磁总阀控制回路存在的问题，介绍了解决办法及取得的效果。
G2-2 series bus Valve Island of Numatics has many technical advantages.
Numatics的G2-2系列总线阀岛有很多技术优势。
The gas distribution system shall cover from the gas outlets on the benches or fume hoods to gas regulator manifolds at the cylinder area.
气体管路安装从气瓶站总阀门到工作台上各个气体阀门。
Lift out the disc holder assembly from the body of the valve.
从阀门的阀体内提起阀瓣固定器总成。
Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.
拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
Pressure governor valve is composed by governing valve, oil, water separation devices and a combination of one-way valves, etc.
调压阀是由调压阀、油水分离器及单向阀等构成的一个组合阀总成。
fire main with fire valve
带消火阀的消防总管
R&D of a Valve Terminal Based on Modbus TCP;
Modbus TCP总线型阀岛的研制
To reverse the seat disc, unscrew the disc screw and disassemble the disc washer and disc rubber from the disc holder assembly.
为了翻转阀座阀瓣，则要拧松阀瓣螺丝，从阀瓣固定器总成拆解阀瓣垫圈和阀瓣橡胶。
The stem and diaphragm assembly will normally remain with the cover as it is removed.
阀杆和隔膜总成通常附在阀盖上与阀盖一起拆离。
Kits include: Disc& Spring assembly, Cover O-ring and lubricant.
组件包括：阀瓣和弹簧总成，阀盖O形环和润滑剂。
Install brake lines that connect master cylinder to combination valve.
安装连接总泵至组合阀的煞车管线。
The Development of Digital Valve Controller Based on Fieldbus Technology;
基于现场总线的数字阀门控制器开发
Intelligent controller of electrical valve based on PROFIBUS-DP
基于PROFIBUS—DP总线的智能电控阀门控制器
Submersible Turbine Pump Unit and Its Multi-function Valve Assembly
潜油涡轮泵机组及其多功能阀体总成
Research on CAN Bus of Intelligent Electrical Valve Actuator
智能阀门电动执行器的CAN总线研究
He later became Vice-President and then President of the Republic under the regime of the Northern warlord clique.
在北洋军阀统治时期曾任副总统和总统。
The seat, spring cage, spring and disc assembly are now inpidual components.
此时，阀座，止回笼，弹簧和阀瓣总成就分解成都里的部件。
Remove the cover and diaphragm. The relief valve piston assembly can be lifted straight up and out.
拆卸阀盖和隔膜。安全阀活塞总成可以笔直提出到外面来。
"The assembly should then be slipped onto the valve stem, with the valve in the closed position."
然后将蜗轮操作装置总成套在阀杆上,此时阀门应该处于关闭状态。