An experiment of programming an installation interface which successively shows welcome window and command option window during installing shared software of CD automatic operation with VB was offered in this article to seek and try effective approaches for VB practice teaching.
该文提供了一个用“VB”做自动运行光盘的安装界面的实验题,寻求和尝试“VB”实践教学的有效途径和方法。
Design and Making Process for a New Type of Metal SMT Package;
一种新型金属表面安装外壳的设计与制作
Automatism and intellectualization of the press are mustfor satisfying the needs of development for SMT.
模版印刷机是提高模版印刷质量的主要因素之一,为了满足SMT(表面安装技术)发展的需求,必须实现自动化、智能化。
panel mount variable optical attenuator
面板安装可变光衰减器
A disk attached to the mandrel of a lathe to hold the work to be turned.
面板安装在车床活动芯轴上以使工件转动的盘
Control panel. Mount type and technology type can be specified.
控制面板。可指定安装类型和技术类型。
It is not allowed to be installed with the Access Panel facing up or down.
安装时不允许将进入面板朝上或朝下。
All light fixtures shall be installed with safety glass panel cemented and sealed to the hood roof.
照明装置上面有安全玻璃面板，并且和柜体密封。
%1 is not installed correctly. Please reinstall using Add/Remove Programs in the Control Panel.
%1安装不正确。请从“控制面板”中的“添加/删除程序”重新安装。
Install the main unit to the in-dash location, and the connection box under the navigator's seat, etc.
把主机安装到仪表板上。并把连接盒安装到副驾驶座的下面。
"Please go to the Control Panel to install and configure system components.
"请转到“控制面板”来安装和配置系统组件。
Cut a space with the following dimensions into the panel for installation.
以以下尺寸削减出进入面板的空间安装。
Install push-in fastener holding center of fascia to rear closure panel.
安装中心面板紧固到后罩盘上的推进式固定件。
All the controlling and regulating elements are installed on the front panel for the convenience of use.
控制，调节元件均安装在面板上，使用方便。
Pressure should be the formation of metal plates installed, straight, there should be no construction of the plate surface residue and dirt.
压型金属板安装应平整、直，板面不应有施工残留物和污物。
Install bolts to hold fascia to headlamp mounting panel at each side of grille.
将固定面板在风栅两侧头灯固定板的螺栓安装好。
Locking attachment: To fix plug and receptacle together for reliable fastening, usually applying to crimp series connectors.
安装组件用来将产品和安装面板固定在一起，其通常安装在连接器的固定端和安装板固定在一起。
A control board of device on which various displays, switches, and buttons, etc., are installed.
一种机器设备的控制面板，上面安装有各种显示器和开关、按钮等。
The controller is floor/Base plate mounted by using the three pre-drilled holes in each leg. The holes are dimensionally on the same line for ease of mounting.
控制装置是通过每个支柱的三个预钻孔安装在地面/底板上。这些孔位于同一条支线上,便于安装。
A shield over or behind a vehicle's wheel to prevent mud or water from splashing onto that vehicle or a following vehicle.
挡泥板安装在汽车轮子外面或后面的保护板，以免泥或水溅入汽车内和溅上后面的汽车
The frame on which boards are mounted.
安装电路板的框架。