This paper is a rescarch report involued the chemical composition design, microsfruc-ture, manufacturing process, technology properties, wear tests, application properties andfield tests of a high chromium cast iron spraying powder.
本文阐述一种高铬耐磨铸铁喷焊粉末的成分设计、组织状态、制粉过程、工艺性能、磨损试验、使用性能和工业性试验结果。
Structure and properties of spray layer made by different quantities of self-fluxed alloy powder are studied.
采用铝热自蔓延高温合成法在钢板表面进行喷焊,研究不同用量自熔性合金粉末所制得的喷焊层的组织及性能,分析了合金元素对基体组织和性能的影响。
Research on the Preparition of Ni-based Self-fluxing Alloy Powder and the Performance of Anti-corruption of the Coating of It;
镍基自熔性合金粉末的制备及其涂层耐蚀性能的研究
Study on Laser Cladding of Ni60 Alloy Coating on AZ31B Magnesium Alloy
AZ31B镁合金表面激光熔覆Ni60合金粉末组织及性能
Nickel-Based Alloy Powder Welding Properties of Laser Cladding
镍基合金粉末的激光熔覆焊接性能研究
Friction and wear properties of laser melt-cladding with high-aluminum bronze powders
高铝铜合金粉末激光熔覆层的摩擦磨损性能
Self-fluxing alloy powders--Determination of solidus-liquidus temperature range
GB/T6526-1986自熔合金粉末固-液相线温度区间的测定方法
refractory metals made by powder metallurgy
粉末冶金难熔金属材料
The adaptability of free - spraying alloy powder made by oneself on induction remelting process was investigated.
研究了自制免喷涂合金粉末对感应重熔方法的适应性，以及重熔工艺参数对重熔层组织状态的影响。
Study on Characteristics of Fe Based Alloy Coating Prepared by Laser Cladding on High-temperature Forging Mould
高温锻压模具表面激光熔覆铁基合金粉末的特性研究
Study on Ni60A Alloy Powder Coating by Supersonic Frequency Induction Heating
超音频感应熔覆Ni60A合金粉末涂层的研究
Study of Laser Modification and Alloying of Ni-P Deposited Aluminum and Laser Cladding of Aluminum-based Powders on Magnesium Alloys;
铝基体Ni-P镀层的激光改性、合金化与铝基粉末材料的镁合金激光熔覆研究
Metallic powder material--Self-fluxing Fe-Cr-B-Si alloy powder
GB/T8549-1987Fe-Cr-B-Si系自熔合金粉
Metallic powder material--Self-fluxing Ni-B-Si alloy powder
GB/T5315-1985Ni-B-Si系自熔合金粉
Metallic powder material--Self-fluxing Ni-Cr-B-Si alloy powder
GB/T5316-1985Ni-Cr-B-Si系自熔合金粉
Influence of prealloyed powder on properties of powder metallurgy NiFe_(18.5)Al_(25) alloy
预合金粉对粉末冶金NiFe_(18.5)Al_(25)合金性能的影响
Fabricating Process and Properties of the Powder Metallurgy of High Aluminum Zn-based Alloy
粉末冶金高铝锌基合金的制备与性能
Preparation of Al-Mg Alloy by Powder Metallurgy Forming
Al-Mg合金粉末冶金成形性研究
Standard method for determination of particle size of powders of refractory metals and compounds--Fisher method
GB/T3249-1982难熔金属及化合物粉末粒度的测定方法费氏法
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF IN-SITU SYNTHESIZED TITANIUM MATRIX COMPOSITES PREPARED BY POWDER METALLURGY
粉末冶金制备原位自生钛基复合材料的显微组织和力学性能研究