The meaning and methods to detect the normal position deviation of the cross-braced bogie are discussed.
论述了对交叉支撑式转向架进行正位偏差检测的意义和方法 ,介绍了测量系统的设计原理、结构和特点。
Some new techniques applied at present in the three new types of speed increased freight car bogies of cross-braced type, tilting type and Sheffield radial type are described.
对当前交叉支撑型、摆动型、谢菲尔径向型 3种新型提速货车转向架中所采用的一些新技术进行了介绍。
single ramp method,two-crossed ramps method and the new method-two crossed ramps with considering spatial distortion.
利用Magphan体模在13台设备上对层厚的三种测量方法即单一斜面方法、交叉斜面方法和本文提出的改进方法(考虑几何畸变的交叉斜面测量方法)进行层厚测量实验。
Improvement of Structure Lateral Rigidity by Crossing Inclined Support
交叉斜撑法应用于改善结构楼层侧向刚度
pylon diagonal drag brace
吊臂架交叉阻力支撑条
Half pass: A forward and sideways movement at the trot or canter where the horse crosses its legs.
横斜步：在进行快步和慢跑步时，两腿交叉迈斜步。
a fabric with prominent rounded crosswise ribs.
周围有突出的交叉斜纹的纤维。
A pillar, rectangular in cross section, supporting an arch or roof.
支柱交叉处的长方形柱子，支撑一个拱顶或屋顶
The Study of Bogie Frame Brace Welding Process and Fatigue Life;
转向架交叉支撑装置焊装工艺与疲劳寿命研究
Introduction and Development of Frame-Braced Device Adopted on K2 Bogie;
转K2型转向架交叉支撑装置引进与研制
Influence of value assigning of inner forces in cross-braced frame on its anti-seismic behavior
交叉支撑内力取值方法对结构抗震性能的影响
(crystallography) having three unequal crystal axes with one oblique intersection.
（结晶学）有三个不同的晶轴，其中一个倾斜的交叉。
(crystallography) having three unequal crystal axes intersecting at oblique angles.
（结晶学）有三个以倾斜的角度交叉的不同晶轴。
Location Evolution and Keeping of IGSO Cross Node
倾斜同步轨道卫星交叉点位置演化及保持
Sloping roofs can be further categorized into the double slope roof, the cone, cross roves and combinations of these several forms.
倾斜屋顶又可以再分为两面倾斜形、圆锥形、十字交叉形及混合形。
a sail extended by a sprit.
用斜撑帆杆支撑的帆。
“Research on Strategy and Management of E-business”, IBM SUR(Shared University Research) Project.
“电子商务的支撑环境”，复旦大学电子商务交叉学科重点课题。
Study on Shear Performance of High Strength Cold-Formed Thin-Walled Steel Framing Walls with Cross-Bracing;
高强冷弯薄壁型钢骨架带交叉支撑墙体抗剪性能研究
Research on Bogie Frame Brace Manufacturing Process and Fatigue Life;
提速货车转向架下交叉支撑装置制造工艺与疲劳寿命研究
Analysis & Research on Failure of Frame Braced Bogie for Higher Speed Railway Freight Car;
铁路提速货车转向架交叉支撑装置失效分析研究
Design and Application of Moulding Board and Support of the Intersection Section Crown of the Diversion Tunnel in the Jishi Gorge Hydropower Plant
积石峡导流洞交叉段顶拱模板及支撑系统设计与应用