Discussion on bending rigidity anisotropy of fabrics;
织物弯曲刚度各向异性探讨
Bending deformation and bending rigidity of mechanical components;
机械构件的弯曲变形与弯曲刚度
Approach to calculating bending rigidity of rubber-reinforced track of tractors and its experimental verification;
拖拉机橡胶钢筋履带弯曲刚度计算方法与试验验证
Applied investigation on the effects of bending stiffness of machine bed's simulating parts on its thermal geometrical precision;
机床床身模拟件的弯曲刚度对其热态几何精度影响规律的应用研究
Analysing parameters of bending stiffness of FRP and designing its structure;
FRP弯曲刚度的参数分析与结构设计
Engineering algorithm on bending stiffness of elastic rubber bushing of car suspension;
轿车悬架弹性橡胶衬套弯曲刚度的工程算法
The mechanical models of bend stiffness and bend strength of the pallets girder and deck were established.
通过分析木托盘在均布载荷作用下的受力变形情况,建立了木托盘梁和铺板的弯曲强度和弯曲刚度的力学模型,提出了托盘弯曲强度和刚度的条件。
The beam has a constant flexural rigidity.
该梁具有常数弯曲刚度。
DISCUSSION ON THE NECK BENDING STIFFNESS OF WORK ROLLS IN THE HYDRAULIC BENDING ROLL CONTROL SYSTEM
液压弯辊控制中工作辊辊颈弯曲刚度探讨
INFLUENCE OF HOLE POSITION ON BENDING RIGIDITY OF UD-LAMINATE
穿孔位置对单向层板弯曲刚度的影响
THE RESEARCH OF INFLUENCE ON SUSPENSION BRIDGES AFTER CONSIDERING BENDING RIGIDITY OF CABLE
考虑主缆弯曲刚度后对悬索桥的影响
Influence of chordwise bending stiffness on aeroelastic characteristics of flexible high-aspect-ratio wing
水平弯曲刚度对大展弦比机翼颤振的影响
The stiffness of a fabric can be objectively determined as the average of the flexural rigidities (in warp and weft direction) .
织物的刚性可以客观地从经纬两个方向的弯曲刚度来确定。
Simulating Investigation into the Influence of the Bending Stiffness of a Machine Bed on Its Thermal Geometrical Precision
机床床身的弯曲刚度对其热态几何精度影响的模拟研究
FINITE ELEMENT ANALYSIS OF AXIAL FLEXIBILITY AND FLEXURAL STIFFNESS OF WELDED HOLLOW SPHERICAL JOINTS
焊接空心球节点轴力柔度和弯曲刚度的有限元分析
The Effects of the Number of the Screw in the Plates on the Bending Stiffness of Plate and Screw Structure;
螺钉数量对钢板螺钉内固定结构弯曲刚度的影响
The Effect of the Number of Screws on Strain and Bending Stiffness of the Dynamic Compression Plate Strain
螺钉数量对动力加压钢板应变和弯曲刚度的影响
STUDY ON FLEXURAL RIGIDITY OF STEEL-LIGHT WEIGHT CONCRETE COMPOSITE BEAMS WITH RE-ENTRANT TROUGH PROFILED STEEL SHEETING
钢-闭口型压型钢板轻骨料混凝土组合梁弯曲刚度研究
Research on elastic deformation and flexural rigidity of the seal plate in the combination type slurry valve
组合式矿浆阀密封板的弹性变形和弯曲刚度研究
In addition, the anal fin has a curvature that fits the round shape.
还有，尾鳍有一个弯曲度刚好适合鱼的圆型身体。
Derivation and Realization on the Stiffness Equation of Uniform Section Bending Bar
等截面弯曲杆件刚度方程的推导和认识
CALCULATING FORMULAS FOR EQUIVALENT STIFFNESS AND STABILITY OF CURVED BAR SIMPLY SUPPORTED AT BOTH ENDS
两端简支弯曲杆件的等效刚度、稳定性计算公式
The Study on the Stiffness Performance of Steel-Pipe Trusses with Curved Chords;
弦杆弯曲的圆钢管桁架的刚度性能研究
Global stability analysis of bored shafts with initial bending imperfection and varying stiffness
含初弯曲缺陷的变刚度井壁整体稳定性分析
The slip displacement increases the curvature, reduces the stiffness, increases the additional moment and consequently leads the increase of deflection.
滑移增大结构曲率,降低构件刚度,增加附加弯矩,从而引起挠度增大。