Analysis of Zn Build up in Lubricated Friction Wear Tests for High Al-Zn Base Alloy;
高铝锌基合金摩擦磨损试验中增重原因分析
Study of surface strengthening technology and wear test of diesel engine cylinder liner
柴油机气缸套表面强化工艺及磨损试验的研究
The physical chemical properties of the diesel engine oil samples obtained from various blending ratios with same additive formulation were proceeded the crankcase simulation, oxidation stability and wear tests.
为了用中东原油生产润滑油基础油 ,使用相同的添加剂配方 ,将经传统工艺制得的伊朗减四线和大庆减四线基础油按照不同的质量比例调制成 40CC级柴油机油油样 ,分别进行理化性质测定、曲轴箱模拟试验、内燃机油氧化安定性试验和抗磨损试验。
German AG company, with the help of erosive abrasion tester, tested the wear abrasion rate on different abrasion-resistant materials thr.
德国AG公司使用冲蚀磨损试验装置,以不同的冲蚀角、不同的冲蚀速度和不同混合比的料流冲击试验样,测试了不同耐磨材料的磨损率;并对磨损数值进行了分析比较。
The paper analyzes the mechanism of fly ash abrasion phenomena met with in CFBBs, accompanied by a report on abrasion tests on typical membrane linings, performed with various impact angles of the medium.
该文对循环流化床锅炉内飞灰磨损的机理进行了分析 ,并用磨损介质在不同的冲刷角度下对循环流化床典型膜式壁炉衬进行了磨损试验研究。
Coating abrasion test showed that the wear-resisting property of samples could be improved greatly.
磨损试验表明,用掺入微纳米MoC粉体的喷涂粉喷涂样品表面,样品耐磨性显著提高。
Comparism between Two Standards of Test Methods for the Sliding Wear Resistance of Plastics
两种塑料滑动磨耗试验方法标准的比较
Reconstruction for abrasive testing machine and the research on the hydraulic system
磨耗试验机的改造及液压系统原理研究
Study on abrasion resistance and wet traction of tire tread by abrasion tester
用室内磨耗试验机研究胎面胶的耐磨性和抗湿滑性
The paper covers introductions of ordinary rubber wear test methods and the standards for selecting test conditions.
介绍最常用的橡胶磨耗试验方法和选择试验条件的标准。
Study on the Road Performance of Asphalt Concrete in Ultra-thin Wearing Course;
超薄磨耗层沥青混凝土路用性能试验研究
rotary abrasive tester
旋转式磨料磨损试验机
block-on-ring wear test
试块－试环滑动磨损试验
High-performance frition and wear prototyping based on wear sleady-state
基于磨耗稳定态的高性能摩擦磨损实验机研制
Martindale abrasion machine
马丁代尔耐磨试验机
abrasion resistance assessment by jet test
喷射试验法评定耐磨性
Amsler type abrasion tester
阿姆斯拉型耐磨试验仪
Schopper's cloth abrasion tester
肖伯型织物耐磨试验仪
Smith's cloth abrasion tester
史密斯织物耐磨试验仪
Metallic materials-Wear tests-MM mode wear test
GB/T12444.1-1990金属磨损试验方法MM型磨损试验
Metallic materials-Wear tests-Block-on-ring wear test
GB/T12444.2-1990金属磨损试验方法环块型磨损试验
testing methods for abrasion resistance of plastics by abrasive
塑料耐磨性试验方法-研磨材料法
testing method for abrasion resistance of rubber vulcanized (pico abrader)
橡胶特性试验方法-抗磨性(皮考磨损机)
testing method for wear resistance of high performance ceramics by ball-on-disk method
工程陶瓷制品耐磨性试验-磨球盘法