Analysis of isothermal viscoelastic mechanical behavior in transversely isotropic soft packing for valve;
阀用软填料横向同性等温粘弹力学行为的分析
Study on the isothermal pretreatment of poly[(methylsilylene)ethynylene];
聚甲基硅次乙炔基硅烷等温预处理过程的研究
Simulation on local loading partition during titanium bulkhead isothermal forming process
钛合金整体隔框等温成形局部加载分区研究
Effect of isothermal temperature on microstructure of semi-solid 2024 alloy during partial remelting;
等温温度对半固态2024合金部分重熔组织的影响
Based on this principle,we have analized the isothermal temperature range in which thecracks are apt to arise.
ZGMn13钢水韧处理加热过程中不同等温温度将产生不同的显微组织，根据这个原理，分析了容易产生裂纹的等温温区，并推荐了最佳等温温度。
The results compared with those obtained by conventional quenching and tem-pering,show that 300M steel transformed with isothermal temperature below Ms has a mix structure ofmartenite,lower bainite and retained astenite.
研究了四种含碳量、三种等温温度与力学行为的关系，并与淬火回火３００Ｍ钢进行比较得出，３００Ｍ钢在Ｍｓ点以下温度等温获得Ｍ＋Ｂ＿下＋Ａ＿Ｒ混合组织、超高强度和优良的韧性。
Evolution on morphology of primary phase in semi-solid ZL101 Al alloy during isothermal holding in solid-liquid area;
半固态ZL101合金初生相在固液区间等温保温时形貌演变
The semi-solid slurry of A356 alloy is prepared by lowsuperheat pouring, and the transform of morphology of primary phase in semi-solid A356 alloy during isothermal holding in solidliquid phase region is studied The effects of holding temperature and holding time on the morphology of primary phase in semisolid A356 alloy are investigated.
利用低过热度浇注工艺制备了A356-Sc铝合金半固态浆料,研究了A356-Sc铝合金半固态初生相形貌在固液相区等温保温中的转变,讨论了等温温度和保温时间对A356-Sc铝合金半固态初生相形貌演变的影响。
isothermal-isobaric gas chromatography
等温等压气相色谱(法)
Of or relating to an isotherm.
等温线的属于或关于一条等温线或恒温线的
austemper stressing
等温淬火表面应力;等温淬火前加应力;加工应力等温淬火
Langmuir adsorption isotherm
兰格缪尔吸附等温式
isothernal transformation case hardening
等温转变表面硬化处理
non-isothermal finite lineartheory
非等温有限线性理论
isothermal electron capture chromatography
等温电子俘获色谱(法)
Simulation on isothermal transformation curves and non-isothermal kinetics
40Cr钢等温转变曲线与非等温冷却过程数值分析
A process taking place at constant temperature is said to be isothermal.
温度恒定时发生的过程叫做等温过程。
Effects of temperature and holding time on the semi-solid isothermal heat-treated microstructure of ZL104 aluminum alloy
等温温度和时间对ZL104铝合金半固态等温热处理组织的影响
Study on Soft-sensor Technology and Inferential Control of Temperature in Isothermal Forging;
等温锻造过程中温度软测量技术与推断控制
Influence of Isothermal Forging Temperature on Microstructure and Mechanical Property of 2A70 Aluminum Alloy
等温锻造温度对2A70铝合金组织性能的影响
Isothermal Equations of State of Au and Pt at Room Temperature:Implication for Pressure Scales
金和铂的室温等温物态方程及其压标的意义
Influence of Isothermal Forging Temperature on Microstructure and Mechanical Property of 7050 Aluminum Alloy
等温锻造温度对7050铝合金组织与性能的影响
On the other hand, with the opposite direction, the fluid flow impedes the isotherm movement.
当流动方向和等温线推进方向相反时，流动削弱了等温线的推进。
OVERALL ACTIVATION ENERGY OF ISOTHERMAL TRANSFORMATION IN METAL ALLOY AND ITS MECHANISM Ⅱ.Isothermal Transformation inβBrasses
金属合金等温相变的体激活能及相变机制 Ⅱ．β黄铜等温相变
physics of high temperature plasma
高温等离子体物理学
a sweet temper,nature,disposition,etc
温顺的脾气、本性、性情等