Observation of oxidation process of diamond with high temperature microscope;
用高温显微镜直接观测金刚石的氧化过程
The hot tensile strain process of the microstructure of duplex stainless steel was investigated with high temperature microscope(CSLM).
本文利用共聚焦激光扫描高温显微镜(CSLM)等设备对双相不锈钢的高温拉伸微观变形过程进行了研究。
Pictures of high temperature microscope show that the sintering process can be pided into four stepps.
高温显微镜图片表明,制品的烧结过程可以分为4个阶段。
For original position investigation of Al-Mg and Al-Cu,binary alloy powders during sintering a high-temperature optical microscope was employed,and the regularities in sintering of pure metal powders whose binary alloys have eutectic were revealed.
采用高温光学金相显微镜对Al-Mg和Al-Cu等纯金属粉末构成的二元合金体系进行烧结的原位观察,发现了具有共晶反应的纯金属粉末的烧结规律,并直接观察到晶界作为快速扩散通道的现象。