Numerical simulation on sequential motion compacting of spray deposited 5A06 aluminum alloy;
喷射沉积5A06铝合金楔压变形的数值模拟
Planar inelastic stability of tapered columns,axially and eccentrically loaded,are studied with the proposed equations respectively.
在已有的楔形单元弹性刚度方程的基础上 ,推导了它的弹塑性增量刚度方程 ,并利用所得到的结果研究了轴心和偏心楔形压杆在强轴平面内的非弹性稳定 ,得到了各种楔率下楔形压杆的柱子曲线和轴力 弯矩相关曲
Numerical Simulation on Wedge Deformation of Spray-deposited 5A06 Aluminum Alloy;
喷射沉积5A06铝合金楔压变形的数值模拟
Study on the Densification Process of Spray-deposited 5A06 Aluminum Alloy by Wedge Pressing;
喷射沉积5A06铝合金楔压致密化工艺的研究
The Research on the Technics of Cyclic Pressing in the Densification of Large-dimension Ring of Al-20%Si/SiC_p;
大尺寸喷射沉积Al-20%Si/SiC_p环件楔压致密化工艺的研究
Effect of Temperature Gradient Cyclic Pressing on Densification of Spray Deposited SiC_p/7090 Aluminum Matrix Composite;
梯温楔压对喷射沉积SiC_p/7090铝基复合材料致密化的影响
wedge and plunger burster
楔与塞柱型液压冲破机
The Ultimate Load-Carrying Capacity in-Plane of Tapered Member;
楔形压弯构件平面内稳定极限承载力
Technological Process and Die Design for the Belt Sheave
板制多楔皮带轮冲压工艺与模具设计
Wedge-shaped Extrusion Resistance Analysis of Flat-pipe Belt Conveyor
扁管带式输送机的楔形挤压阻力分析
Influence of the Pressure-Viscosity Effect on the Characteristics of Spiral Oil Wedge Hydrodynamic Bearing
压黏效应对螺旋油楔动压滑动轴承特性的影响
Out-of-plane Stability Analysis of Tapered I-sectioned Beam-columns with Slender Web;
楔形宽薄腹工形截面压弯构件平面外稳定分析
Local Buckling and Post-Buckling Strength of Tapered Member;
楔形压弯构件的局部屈曲及屈曲后强度
The Study on the Development Process and Rule of Oil Wedge Discharge in Transformer
变压器内部油楔放电发展过程及规律的研究
Analysis on metal flow and deformation mechanism during thickening process of poly-wedge pulley spinning
多楔带轮旋压增厚成形阶段金属流动规律分析
Design of Single Oil Wedge Hydrodynamic Lubrication Journal Bearing Based on MATLAB
基于MATLAB的单油楔液体动压径向轴承设计
The Research on Oil Film Rupture Regular of Novel Spiral Oil Wedge Hybrid Journal Bearing
新型螺旋油楔动静压轴承油膜破裂规律的研究
Application of Magnetic Slot Wedge in Y2 Series High Voltage Asynchronous Motor
磁性槽楔在Y2系列高压电动机中的应用
Superplastic Extrusion of a Wide Strip through a Tapered Die Using Non-local Friction Law
楔形模宽条料超塑性挤压非局部摩擦分析
To fix in place or tighten with a wedge.
把…楔住，把…楔牢