Application of image well logging technology to igneous rock reservoir;
成像测井在火成岩中的应用
A Lithologic Identification Method of Igneous Rocks by Log and Its Application: a Case of the Igneous Reservoir in Hong Shanzui Oilfield;
火成岩岩性测井识别方法及其应用研究——以红山嘴油田石炭系火成岩油藏为例
Research on the transformative technique of igneous rock cranny aquifer bed grouting;
火成岩裂隙含水层(体)注浆改造技术研究
Based on the previous studies of rock lithology,structure,and construction,and the collected seismic & logging data,this study focused on the eruption times and periods,the lithofacies,and the distribution features of volcanic rocks in fault block Zao-35 of Dagang Oilfield.
大港油田枣35断块沙河街组三段火成岩油气藏为裂缝—孔隙型双重介质稠油油藏,属于复杂特殊类型油气藏。
According to the characteristics of the magnetic field in this area, the magnetic fields of the upper layer volcanic rock and the low layer volcanic rock are separated by using advanced potential field separation technique; then, the lower layer volcanic rock′s depth and thickness are inverted by using 3 dimension models.
针对本地区磁场的特点，用先进的位场正演和分离技术将本区上、下层火成岩的磁场进行了分离。
Several hydrocarbon fields whose reservoir is volcanic rock have been discov ered in China,showing a new hydrocarbon exploration realm.
目前，我国已有多个以火成岩为储层的油气田相继发现，进一步开拓了找油领域。
Geological features,such as NNE to EW trending structural framework,igneous province,palaeogeothermics gradient and metallogenesis suggest consistently a close relation of the Zhongtiao belt to the Qinling orogen.
从中条裂谷的地质特征分析,如NNE-EW向构造格架、火成岩省、古地热状态及成矿作用等,均与秦岭造山带碰撞作用息息相关。
In order to realize the roll in one heat in Small Section Plant of Nanchang Iron and Steel Co ,the Φ540mm roughing was added and the heavy reduction was applied The processing parameters design and pass system were introduced as well as the obtained good effect
南昌钢铁公司小型厂为实现一火成材 ,增设了Φ5 40mm粗轧机并采用了大压下方案。
Reformation of roll in one heat of continuous casting billet for open train mill has been done in the No.
济钢第二小型轧钢厂对横列式轧机进行连铸坯一火成材改造 ,增加 5 40 mm粗轧机 ,重新设计孔型系统和轧制道次 ,并进行参数校核计算。
According to present equipment condition Shiheng special steel plant produces 50kg/m jointing clamping plate used of 150mm×150mm continuous casting billet and “roll in one heat” process Through reasonable collocating pass and rolling process the rolling production is stable,the product accords with the standard TB/T2342-93 and G13 699-88,and the production cost is decreased by 200 yuan/t(RMB
石横特殊钢厂中型车间根据现有设备情况，采用１５０ｍｍ×１５０ｍｍ连铸坯一火成材生产５０ｋｇ／ｍ钢轨用接头夹板，经合理设计孔型及轧制工艺，轧制稳定，产品符合ＴＢ／Ｔ２３４２－９３和ＧＢ６９９－８８要求。