1.使卷曲,翘曲,弯曲;挠曲,扭歪
2.【纺】整经
3.歪曲,使偏倾
4.【航】用绞船索牵曳
5.(为利用河泥等沉积物肥田而)引水淹没(土地)
6.卷曲,翘曲;歪曲;歪,偏
1.使卷曲,翘曲,弯曲;挠曲,扭歪
2.【纺】整经
3.歪曲,使偏倾
4.【航】用绞船索牵曳
5.(为利用河泥等沉积物肥田而)引水淹没(土地)
6.卷曲,翘曲;歪曲;歪,偏
1.(织物的)经
2.翘曲;歪曲,歪斜;偏倾;乖戾
3.【航】绞船索
4.【农】沉泥
1.(织物的)经
2.翘曲;歪曲,歪斜;偏倾;乖戾
3.【航】绞船索
4.【农】沉泥
1.to become bent or curved, usually because of damage by heat or water, or to make something do this
2.to affect someone in a way that makes them have strange opinions or thoughts
1.the strings that go up and down the length of a piece of cloth that someone is weaving. The strings that go across the width are called the weft.
1.This frame is known as a creel and its function is to hold the supply packages in a manner so as to facilitate warping.
该架子统称为筒子架或纱架，其作用是使供纱卷装便于整经。
2.Likewise, masturbation was encouraged as an effective safety valveagainst sexual frustration which had a warping effect on the mind.
同样地，手淫是鼓舞激励作为一种有用的平安阀否决性挫折，有一个扭曲的影响。
3.Likewise, masturbation was encouraged as an effective safety valve against sexual frustration which had a warping effect on the mind.
同样地，手淫是鼓励作为一种有效的安全阀反对性挫折，有一个扭曲的影响。
4.The analytical results show that this method is simple and practical, and can identify the two different types of "up warping" effectively.
分析结果表明：二阶导数法简单易用，可以对两种不同情况引起的“上翘”进行有效的识别。
5.Instead, such time warping seems to be a trick played by one's memory.
时间这样扭曲似乎是人们记忆所玩的一个小把戏。
6.A wooden door has a very limited life even if it is well looked after, as it is virtually impossible to stop wood from warping and bending.
即使木门保养的再好，它的使用寿命也是有限的。事实上，人们在阻止木制品变形及弯曲方面是无能为力的。
7.In the case of warping, this means that the ballooning of the yarn coming from the creel package must BE controlled.
这就意味着，在整经过程中，对从筒子上退绕下来的纱线形成的气圈要加以控制。
8.If the above involved in anti-warping the technical measures of falls, part of the Board; and drying, and pressure can only be scrap.
若以上涉及的不攻翘曲的工艺步调不落实，局部不活子烘不抬也不有用，只能报废。
9.The front cover and back crepe folded and warping materials primarily on text and cover papers and the brush adhesive.
与造成封面书背绉折和翘曲有关的材料主要有内文和封面用纸及所刷胶粘剂。
10.If a piece is irregular in shape, a slow rate is all the more essential to eliminate warping and cracking.
如果工件形状不规则，为了消除翘曲和开裂最根本的是加热速率要缓慢。