1.universal asynchronous receiver/transmitter
1.Consider a handheld with a built-in CSR Bluetooth chipset interfaced to the system using a UART interface.
考虑一种拥有内置CSRBluetooth芯片组的手持设备与使用UART接口的系统的连接。
2.Multiprocessor UART protocol on isolated CAN physical bus is used for the communication between the modules.
模块间采用多机UART协议在隔离的CAN物理总线上进行相互隔离的通信。
3.Do the same thing for the TX line, except that of course it's mapped to the "uart_TX" net.
对TX行执行同样的操作，当然这次是映射到“uart_TX”网络。
4.In the case of the UART, there's not a lot to configure apart from the baud rate and framing details.
对于UART来说，除了波特率和帧细节外没有太多属性要配置。
5.UART controller and LCD display control module are designed for the improvement of the integrity of the whole system.
设计UART控制器和LCD图像显示控制模块，使其与整体系统相互配合，提高了系统的完整性；
6.By using the technical scheme of the invention, the problems of UART buses in a complicated system are effectively solved.
通过本发明的技术方案有效解决了UART总线在复杂系统中应用所遇到的问题。
7.The BlueZ hci_uart link driver talks with Bluetooth UART channels and connects the emulated serial port to the BlueZ stack.
BlueZhci_uart链接驱动程序与BluetoothUART通道交互并将模拟的串行端口连接到BlueZ栈。
8.The legacy serial driver that drives this board's UART channels can send and receive data from the BlueZ UART transport driver.
这个母板的UART通道使用的传统串行驱动程序可以从BlueZUART传输驱动程序上收发数据。
9.All you need to do is select the appropriate connection from the drop-down list in the Net Name column; in this case, uart_RX.
要做的就是从NetName列的下拉列表中选择合适的连接；在本例中，选择uart_RX。
10.Because there are many lower computers, the platform expands a 8-UART communication module which that have the high speed buffer.
由于有多个下位系统，平台设计扩展了8路带高速缓冲的异步串行通信模块。